01-15-2014 07:08 AM
We installed Backup Exec 2012, but when we want use some tapes, in the Storage there is a pencil in the tape, and we cannot do backup in these tapes.
I attach the picture of this.
Someone knows how can We use all tapes?
Thank you.
Solved! Go to Solution.
01-16-2014 01:42 AM
Looks like these are LTO-2 tapes. And the drive looks like HP 1760. If I recall, this tape drive is LTO-4 and if that's the case, LTO-4 drives can only read LTO-2 tapes, but cannot write to them.
Tape & Drive compatibility matrix - http://knowledgebase.tolisgroup.com/?View=entry&EntryID=178
01-15-2014 07:45 AM
01-15-2014 07:56 AM
It would be so helpful if the icon glossary was published so we could know what these icons mean.
https://www-secure.symantec.com/connect/ideas/backup-exec-2012-icon-glossary
01-15-2014 11:23 PM
Hi pkh,
if I associate at media set, then the tape is ejected.
Thank you
01-15-2014 11:34 PM
...if you associate the tape with the Scratch set it should be seen as available for use. Are there any alerts you need to respond too?
Thanks!
01-15-2014 11:37 PM
Do these tapes have some sort of sliders making them write-protected ?
Are these tapes compatible with the tape drive ?
Another possibility is that these tapes were marked read-only if there were excessive hard read/write errors..
Try running vendor diagnostics against the tape and the tape drive.
01-16-2014 12:07 AM
01-16-2014 01:38 AM
Hello Vivek,
these tapes worked fine in Backup Exec 2010, then they are compatibles with LTO, some of them never was used
I attach photo of these tapes, some problem with Backup Exec 2012?
Thank you
01-16-2014 01:42 AM
Looks like these are LTO-2 tapes. And the drive looks like HP 1760. If I recall, this tape drive is LTO-4 and if that's the case, LTO-4 drives can only read LTO-2 tapes, but cannot write to them.
Tape & Drive compatibility matrix - http://knowledgebase.tolisgroup.com/?View=entry&EntryID=178
01-16-2014 02:18 AM
Thank you Vivek