11-10-2014 04:30 PM
I was unable to find my tape drive on the BE 2014 HCL, but we are currently running BE 2010 and could not find it on the HCL for that version either. What I would like to know is if anyone has tried BE 2014 with this tape drive(Quantum Superloader 3 L700) and did it work?
11-10-2014 04:38 PM
11-10-2014 08:00 PM
There are quite a bit of Quantum Superloader 3's listed in the HCL along with the drive type and interface. I believe the L700 uses the DLT-S4 drive. Best to check the device and drive inquiry string and see if it matches in the HCL or not.
11-11-2014 08:07 AM
I think the "L700" is just the internal model number that Quantum uses. All the marketing is simply done with "SuperLoader 3". So you can ignore the "L700" for HCL purposes as it doesn't clarify the type of drive or interface.
What tape drive and tape drive inquiry string do you have?
What interface are you using (pSCSI, SAS, FC)?
Can you post your adamm.log file from BE 2010?
Have you tried it with BE 2014?
The SuperLoader 3 doesn't have major differences between the BE 2010 and BE 2014 HCLs. I expect yours to work and be supported with both BE versions, but the details are needed to confirm.
11-11-2014 08:17 AM
I looked at the Identifiers in the registry for the drive and it showed:
QUANTUM UHDL
QUANTIUM ULTRIUM 4
Is that the correct string I'm looking for?
11-11-2014 08:21 AM
SCSI
11-11-2014 08:23 AM
I checked and was unable to find the adamm.log under the BackupExec folder. Should I be looking elsewhere?
11-11-2014 09:54 AM
The adamm.log file is one level deeper... under the \logs folder.
A Quantum SuperLoader 3 with Quantum LTO4 is listed as supported when using SAS, but I don't see a listing for parallel SCSI. Maybe it is just an oversight and missing from the HCL as I bet it works fine with either the SCSI or SAS interface.
11-11-2014 12:20 PM
So the adamm.log said the same thing as the registry. I haven't tried the BE 2014 because we are doing a hardware refresh and fresh install. I don't want to interrupt the current server because it's in production. I also don't want to use our current tape drive if we are going to run into problems with BE 2014.
11-14-2014 10:28 AM
We have confirmed that the Quantum SuperLoader 3 robotic library with Quantum LTO4 SCSI tape drive is missing from the Backup Exec HCLs. We are working to correct that.