cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Running Bexec 2012 B2D

Hello !

 

I am running B2D everything goes OK until the job will do verify.

Then I sometimes get.

 

Job ended: den 27 april 2013 at 08:28:37 Completed status: Failed Final error: 0xe000810d - Physical Volume Library Media not found. Final error category: Backup Media Errors For additional information regarding this error refer to link V-79-57344-33037

 

Suggestions?

Regards Janne Spetsare

17 Replies
Highlighted

Hi,   Is the drive online

Hi,

 

Is the drive online when you get this error?

Thanks!

Highlighted

Hello Janne,     Check if the

Hello Janne,

    Check if the drive where the B2D is present if it is highly fragmented. Also try to run the B2D test tool and see if it comes up with any kind of errors

Here is the link for the B2D test Tool

http://www.symantec.com/docs/TECH69107 : Information regarding the Backup Exec Backup to Disk Test Tool - B2Dtest.exe

You can download the right version of the test tool from the Related articles of that technote.

 

Thanks,

-Sush...

Highlighted

Yes drive is online. It is a

Yes drive is online. It is a USB-drive with two 1TB disks.

Cannot see if it is fragmented.

 

Janne Spetsare

Highlighted

Are you able to reproduce

Are you able to reproduce this error "Library Media not found" with a test backup and verify which has infinite protection ?

Highlighted

I do not get the problem

I do not get the problem every time I run my backup.

Tried to run the verify job after the actual backup. The verify ended in error.

It tríed to verify:

Drive and media mount requested: 2013-05-14 00:16:07 Media mount failed. Physical Volume Library Media not found. Media GUID: {30002551-297F-431E-9FD1-2F9204E5DB34} Media Label: B2D004364

Looked at my NAS and the file does not exist there. Now I will check my backup and see if it is used at all....

Se clip

Drive and media information from media mount: 2013-05-13 23:00:10 Drive Name: Disk storage 0001 Media Label: B2D004358 Media GUID: {cff7e177-a989-4904-b364-d401a7f89efd}
All Media Used B2D004358 B2D004359 B2D004360 B2D004361 B2D004362 B2D004363 B2D004364 B2D004365 B2D004366 B2D004367 B2D004368

Someone or something is deleting it?

Ideas!

 

...is this a NAS ot a USB

...is this a NAS ot a USB drive with 2 drives in it?

Did you run B2Dtest.exe as advised as well?

Do you get the same error if you run the backup to a local drive (if possible)?

Highlighted

It's a Synology NAS and it is

It's a Synology NAS and it is connected with USB. B2Dtest was OK.

I cannot run it on a local drive. I do not have the space for it.

 

Janne Spetsare

Highlighted

...have you tried to connect

...have you tried to connect the NAS to the LAN and run a backup that way?

Highlighted

Sorry but the NAS is

Sorry but the NAS is connected to the LAN and not to USB.

 

Janne Spetsare

Highlighted

...so now that this has been

...so now that this has been worked out (you mentioned USB first!), have you checked the NAS for any hardware issues?

Highlighted

When you setup the disk

When you setup the disk storage, did you use the UNC path to the NAS or did you use a mapped drive?  If it is the latter, then it is not supported because mapped drives are associated with an online session and BE runs as a batch job.

Highlighted

...matter of interest, but if

...matter of interest, but if that model of NAS is capable of iSCSI, why not turn that on and present the disks to the media server? This is a very effective way of backing up to a NAS (used it myself with the Iomega NAS series!).

Thanks!

Highlighted

I have used iSCSI but had

I have used iSCSI but had some problems with that too.

I have used my NAS for 11 months now it suddenly has problems. Setup via UNC.

No errors in logs on NAS no errors in logs on server except for

Error from Backup Exec mentioned earlier.

 

Janne Spetsare

 

 

Highlighted

...weird. iSCSI should just

...weird. iSCSI should just work. Have you perhaps checked your network switches as well, or is this a direct attachment?

Thanks!

Highlighted

The NAS is connected on the

The NAS is connected on the same switch as the server. But I have not checked the logs.

But why should bad network connection lead to that one file is deleted after backup?

 

 

Janne

Highlighted

It won't...but something is

It won't...but something is deleting the file. What is your Append/OPP settings on the media set?

Is there ANY antivirus perhaps scanning that NAS?

If you run a small backup to a local disk, do you end up with the file being deleted too?

Thanks!

Highlighted

I will look into these

I will look into these questions on Friday.

 

Regards Janne Spetsare