cancel
Showing results for 
Search instead for 
Did you mean: 

Tape Library Offline

aviltauro
Level 4

I need expert advise on the issue we are facing with Veritas Backup Exec and the Dell tape library ML3.

Backup Server is Windows Server 2016.

Tape library is connected to backup server using single FO cable.

The backup operation works fine for a few days. Last time it worked fine for 5 days, then all of a sudden tape library is shown as offline on backup software.  

After rebooting backup works fine, after a few days it goes offline again.

Dell support team upgraded the firmware and replaced the robotic library, still the issue persists.

What could be the possible solution for this issue?

2 REPLIES 2

pkh
Moderator
Moderator
   VIP    Certified

1) Does it go offline during a backup?

2) Is there any entry in the event log regarding the drive going offline?

3) What is the driver that you are using for the tape drive?

 

PJ_Backup
Moderator
Moderator
Employee

I'd just add to pkh's pertinent questions above, was the cable also replaced? Was about the actual drive?

Would also recommend the following comprehensive technote if you want to dig deeoer into possible reasons:

https://www.veritas.com/support/en_US/article.100016050 How to troubleshoot issues with a Robotic Library (autoloader/changer) and/or Tape Drive(s).