cancel
Showing results for 
Search instead for 
Did you mean: 

Used Capacity not correct

tim_groleau
Level 3
Under devices -> under slots, the used capasity for the different tapes shows up as some size out of 17.8, yet we use LTO 2 tapes 200/400. Is there a setting that we may have wrong?
5 REPLIES 5

Colin_Weaver
Moderator
Moderator
Employee Accredited Certified
What does Total Capacity show? (if you click on a tape and then look at properties in the lower pane)

tim_groleau
Level 3
Shows 17.8gig, but thats is not correct

Colin_Weaver
Moderator
Moderator
Employee Accredited Certified
As you mentioned the tapes are in slots - I assume you have a library - does it have barcodes and are the barcodes actually correct for4 LTO2?

What does the Media Type show for the tapes?

Also if you click on the drive in the library does it show the correct Drive and Media Types there?




tim_groleau
Level 3
The media types show up as LTO's, data shows 197gig, but used capacity only says 17.8

Matt_Alexander
Level 5
tim.groleau, have you had any further progress on this?