cancel
Showing results for 
Search instead for 
Did you mean: 

Veritas and DELL LTO

Michal_Stylok
Not applicable
Hello
I'm aware this is simple for you but it is new experience for me
First time in my life I have Lto with 8 slots and verits.
I want to change type in slot 6 when I try to do it from device panel
(export function) I see msg about locked door
When I try to o it form veritas (export function) task is finished with
success but type still isn't ejected
Could you send me any simple procedure to load and unload types to
/from LTO ?
4 REPLIES 4

Christian_Borth
Level 4
Assuming this is a 122T, using BE to run Export/import does not work with that library. You need to manually export/import tapes by using the front panel on the library/drive.

To unlock the library choose "unlock" from the device menu in BE. Then export/import from the front panel. All other functions work via BE as far as I have experienced!

Deepali_Badave
Level 6
Hello,

What is the error message or exact issue you are facing while or loading/unloading tapes. Please let us know in details.


NOTE : If we do not receive your reply within two business days, this post would be marked assumed answered and would be moved to answered questions pool.

Christian_Borth
Level 4
The issue with DELL 122T is that it does not respond to Export/Import commands in Backup Exec. The job starts normally in BE, and you get the messege "plesase remove media...". But you must use the front panel menu to physically export/import tapes to/from the device.

Deepali_Badave
Level 6
Hello,

Please verify the compatibility of the device with Backup Exec.

http://seer.support.veritas.com/docs/274347.htm

http://seer.support.veritas.com/docs/274348.htm


NOTE : If we do not receive your reply within two business days, this post would be marked assumed answered and would be moved to answered questions pool.