cancel
Showing results for 
Search instead for 
Did you mean: 

not able to backup EMC VNXe3100

lorenzo_armando
Level 3

Hi All,

I have a BACKUP EXEC 12 on a old WS 2008 where I'm backuping without problem our EMC NAS VNXe3100 using NDMP.

Now I have got a new server WS12R2 where I installed BACKUP EXEC 15 to try if all works to make migration but I'm not able to backup our EMC NAS VNXe3100 using NDMP or also CIFS. My server is updated, my BCK EXEC 15 is updated and I also installed last firmware avalable for VNXE3100 (2.4.4.22283).

From network I'm able to see all shared folder.

My error are:

Errore finale: 0xe000fefd - La connessione di rete tra il server Backup Exec e Agent for Windows Φ stata interrotta

(Translation: Network connection between Backup Exec Server and Agent for Windows was interrupted)

Errore finale: 0xe000fe28 - Impossibile stabilire una connessione di rete al server. Categoria errore finale: Errori di processo

(Translation: Enable make a network connection to server)

Errore finale: 0xe000130b - L'operazione Φ stata interrotta nel server NDMP. Per ulteriori informazioni, vedere il registro NDMP.
(Translation: Operation was interrupted on NDMP server. For further informations, see NDMP registry)

Thanks a lot to everybody.

Regards.

Lorenzo

5 REPLIES 5

VJware
Level 6
Employee Accredited Certified

Try couple of steps -

1) Disable "Back up with integrated checkpoints (SnapSure)" option from the backup job settings.

2) On the BE media server, navigate to HKLM\SOFTWARE\Symantec\Backup Exec For Windows\Backup Exec\NDMP. Create DWORD value NDMPProcessRead timeout and set it to 7 decimal & restart the BE services.

3) On the new BE server, ensure NDMP port 10000 is available for use.

Rerun the job and check.

lorenzo_armando
Level 3

Hi VJware,

I've made your 3 step and it seems more quickly to connect and to verify credential, but backup it doesn't till work.

This is the error:

Processo completato: venerdì 4 dicembre 2015 a 09:05:13
Stato: Non riuscito --> FAILED
Errore finale: 0xe0001309 - Il server NDMP ha restituito un errore di backup. --> NDMP SERVER HAS RETURNED A BACKUP ERROR
Per ulteriori informazioni vedere il registro NDMP. --> FOR FURTHER INFORMATION SEE NDMP REGISTRY
Categoria errore finale: Errori di risorsa --> RESOURSES ERROR
 

NDMP Log Message: Medium error NDMP Log Message: Write failed on archive volume 1 NDMP Log Message: server_archive: emctar vol 1, 2 files, 0 bytes read, 276496384 bytes written
NDMP Data Halted: Internal Error NDMP Log Message: Mover encountered internal socket error. NDMP Mover Halted: Internal Error

================  NDMP ENVIRONMENT  ================
FILESYSTEM=/Storico01/TestBackexec15Dell
LEVEL=0
DUMP_DATE=-1
UPDATE=Y
HIST=Y
SNAPSURE=N
TYPE=dump
===============  NDMP ENVIRONMENT END  ===============

 

Thanks a lot.

Lorenzo

lorenzo_armando
Level 3

PS: I don't write that the backup on storage didn't start, on tape started but after 500Mb stopped with error.

Thanks.

VJware
Level 6
Employee Accredited Certified

Try this KB first - https://www.veritas.com/support/en_US/article.TECH209515

Also run hardware diagnostics against the tape drive & tapes to rule out any storage issues.

 

lorenzo_armando
Level 3

HI,

I run health check from gui (see attached file) because from ssh it returned this error:

nas_storage: command not found

Hardware diagnostic on tape are ok, if I make a backup to a VM or another phisical file share server it works.

Thanks.