11-22-2015 10:19 PM
cannot establish trust with agent from MMS. No problem with CAS. Please refer to attached pictures. The system time is correct. Thanks
BE15
Agent OS: Windows server 2008 standard
11-22-2015 10:26 PM
If you're running a firewall, make sure port 10000 is open to allow the RAWS connection.
Also make sure that DNS isn't an issue, and that you can resolve the remote server and media server from each other with regards to IP and Name.
Thanks!
11-22-2015 10:44 PM
We have checked that agent is able to telnet MMS 10000 and can ping and resolve the IP. Any other idea? Thanks
11-22-2015 10:47 PM
11-22-2015 10:55 PM
Is the MMS running the same BE version as that of the CASO server ?
Is the Remote Agent also upto date ?
Have you tried reinstalling the Remote Agent by pushing it from the MMS ?
If yes to the above, then on the MMS server stop all BE services.
Browse to \Program Files\Symantec\Backup exec\Data and rename / cut the existing .crt & .key files. Do the same on the affected remote server. Start all services.
Try restablishing the trust from the MMS server.
11-22-2015 11:00 PM
Check any AV running and then make sure it isn't blocking the beremote.exe service. I've had McAfee do that!
11-23-2015 12:19 AM
Both the MMS and CAO shoud be listeingin on Port 6101
Make sure the remote agents you are trying to trust are both able to telnet into both MMS and CASO server on Port 6101 (in other words run telnet on the remote server and test to 6101 on MMS and CASO)
If this works then use the remote agent utility (VxMon.exe) to check that agent publishing is configured to both CASO and MMS server (again this is done on the remote server)
03-10-2016 12:35 AM
Hi VJware,
The Windows agent is able to connect by MMS, but on CASO , it always show conection not established.
I tried your suggestion to remove the cert on Windows agent at \Program Files\Symantec\Backup exec\Data , then publish from MMS or CASO again, still same. Restart backup agent service on Windows Agent/MMS/CASO , still not work. I found the cert name push from MMS and CASO is different.
Please advise the troubleshooting steps when I met this problem. It often happens after I manually install backup agent on Windows agent, add it into MMS, and then add it into CASO. Only the status in CASO has problem.
Thanks
03-11-2016 05:41 AM
Kimmy Shun, did you find any reason or solution for that?