cancel
Showing results for 
Search instead for 
Did you mean: 

Both DMP paths showing enabled and secondary

symsonu
Level 6

Hello friends,

I noticed that disks are showing online but both pasths are disabled.

 

due to which

 

017/07/24 17:00:08 VCS NOTICE V-16-1-10301 Initiating Online of Resource cfsmount9 (Owner: Unspecified, Group: vrts_vea_cfs_int_cfsmount9) on System oracleprod_02
2017/07/24 17:00:08 VCS WARNING V-16-20011-5502 (oracleprod_02) CFSMount:cfsmount9:online:Mount Failed on this Node MountOptions -t vxfs -o cluster,cluster,mntlock=VCS                 Block Device /dev/vx/dsk/sfsdg/oss1a-pm_storage : MountPoint /vx/oss1a-pm_storage
2017/07/24 17:00:08 VCS WARNING V-16-20011-5508 (oracleprod_02) CFSMount:cfsmount9:online:Mount Error : UX:vxfs mount.vxfs: ERROR: V-3-20005: read of super-block on /dev/vx/dsk/sfsdg/oss1a-pm_storage failed: Input/output error
UX:vxfs mount.vxfs: ERROR: V-3-24996: Unable to get disk layout version

oracleprod2:~ # vxdisk -e list
DEVICE       TYPE           DISK        GROUP        STATUS               OS_NATIVE_NAME   ATTR
emc_clariion0_6 auto:cdsdisk   -            -           online               sdf              lun RAID_5
emc_clariion0_7 auto:cdsdisk   -            -           online               sdg              lun RAID_5
emc_clariion0_8 auto:cdsdisk   -            -           online               sdh              lun RAID_5
emc_clariion0_10 auto:cdsdisk   emc_clariion0_10  sfsdg       online shared        sdi              lun RAID_5
emc_clariion0_11 auto:cdsdisk   emc_clariion0_11  sfsdg       online shared        sdj              lun RAID_5
emc_clariion0_12 auto:cdsdisk   emc_clariion0_12  sfsdg       online shared        sdk              lun RAID_5
emc_clariion0_13 auto:cdsdisk   emc_clariion0_13  sfsdg       online shared        sdl              lun RAID_5
emc_clariion0_14 auto:cdsdisk   emc_clariion0_14  sfsdg       online shared        sdm              lun RAID_5
emc_clariion0_15 auto:cdsdisk   emc_clariion0_15  sfsdg       online shared        sdn              lun RAID_5
emc_clariion0_20 auto:cdsdisk   emc_clariion0_20  sfsdg       online shared        sde              lun RAID_10
emc_clariion0_21 auto:cdsdisk   emc_clariion0_21  sfsdg       online shared        sdd              lun DISK
sda          auto:none      -            -           online invalid       sda              -



oracleprod2:~ # vxdisk list emc_clariion0_21
Device:    emc_clariion0_21
devicetag: emc_clariion0_21
type:      auto
clusterid: erharsfs
disk:      name=emc_clariion0_21 id=1386161433.22.oracleprod2
group:     name=sfsdg id=1382527534.52.oracleprod1
info:      format=cdsdisk,privoffset=208,pubslice=3,privslice=3
flags:     online ready private autoconfig shared autoimport imported
pubpaths:  block=/dev/vx/dmp/emc_clariion0_21s3 char=/dev/vx/rdmp/emc_clariion0_21s3
guid:      -
udid:      DGC%5FDISK%5FCKM00131301652%5F6006016011B034003C5AC8232730E311
site:      optimi
version:   4.1
iosize:    min=512 (bytes) max=2048 (blocks)
public:    slice=3 offset=65744 len=209649360 disk_offset=48
private:   slice=3 offset=208 len=65536 disk_offset=48
update:    time=1499988055 seqno=0.132
ssb:       actual_seqno=0.0
headers:   0 240
configs:   count=1 len=51360
logs:      count=1 len=4096
Defined regions:
 config   priv 000048-000239[000192]: copy=01 offset=000000 enabled
 config   priv 000256-051423[051168]: copy=01 offset=000192 enabled
 log      priv 051424-055519[004096]: copy=01 offset=000000 enabled
 lockrgn  priv 055520-055663[000144]: part=00 offset=000000
Multipathing information:
numpaths:   2
sdd             state=enabled   type=secondary
sdr             state=enabled   type=secondary
oracleprod2:~ #

 

dmpeventlogs showing constant messages like below :-->

 

Tue Jul 25 02:01:04.000: Reconfiguration is in progress
Tue Jul 25 02:01:04.000: Reconfiguration has finished
Tue Jul 25 02:01:06.000: Reconfiguration is in progress
Tue Jul 25 02:01:06.000: Reconfiguration has finished
Tue Jul 25 06:01:19.000: Reconfiguration is in progress
Tue Jul 25 06:01:19.000: Reconfiguration has finished
Tue Jul 25 09:23:49.000: Reconfiguration is in progress
Tue Jul 25 09:23:49.000: Reconfiguration has finished
Tue Jul 25 09:43:35.000: Reconfiguration is in progress
Tue Jul 25 09:43:35.000: Reconfiguration has finished

 

 

Any clues to move forward?

connections to EMC looks okay and all initiator are logged in , registered and connected to storagegroup

 One lUN showing as config diabled

 

Defined regions:
 config   priv 000048-000239[000192]: copy=01 offset=000000 disabled
 config   priv 000256-051423[051168]: copy=01 offset=000192 disabled
 log      priv 051424-055519[004096]: copy=01 offset=000000 disabled

Regards

S.

 

10 REPLIES 10

RiaanBadenhorst
Moderator
Moderator
Partner    VIP    Accredited Certified

Maybe the connections were coming and going. I'd open a support case to verify.

Its a two node cluster and happened with only one node

bhoms
Level 4
Employee

What does syslog show during the issue timeframe ? What is Veritas Version and Linux version here ?

Not sure where did you see both the paths are disabled. The vxdisk list output shows that paths are

enabled. Config copy disabled is not an issue since there are other disks in same diskgroup which will have Enabled config copy.

Please open support case.

Yes,  both the paths are showing as enabled but both are showing as secondary.

Ideally one path shows as primary and other secondary as ita an A/P  array.

 

how can I enable the config in one disk ?

bhoms
Level 4
Employee

Enabling config copy is not going to change anything. We need to find out why it is showing as secondary for both the paths. Please open support case.

Hi,

 

I know about support case .I have asked for help if someone can suggest me.

Please donot  reply  with same line . It will discourage other helpers too.

 

 

Regards

S

bhoms
Level 4
Employee

Unfortunately, The information you have posted is not useful to unerstand the issue and suggest any concrete step to resolve the issue.

I am sorry if my information is not correct.

I want to know why dmp is showing both the paths as secondary when both the paths are enabled

 

vxdmpadm getsubpaths
NAME         STATE[A]   PATH-TYPE[M] DMPNODENAME  ENCLR-NAME   CTLR   ATTRS
================================================================================
sda          ENABLED(A)   -          sda          disk         c6       -
sdi          ENABLED(A) SECONDARY    emc_clariion0_10 emc_clariion0 c7       -
sdw          ENABLED(A) SECONDARY    emc_clariion0_10 emc_clariion0 c8       -
sdj          ENABLED(A) SECONDARY    emc_clariion0_11 emc_clariion0 c7       -
sdx          ENABLED(A) SECONDARY    emc_clariion0_11 emc_clariion0 c8       -
sdk          ENABLED(A) SECONDARY    emc_clariion0_12 emc_clariion0 c7       -
sdy          ENABLED(A) SECONDARY    emc_clariion0_12 emc_clariion0 c8       -
sdl          ENABLED(A) SECONDARY    emc_clariion0_13 emc_clariion0 c7       -
sdz          ENABLED(A) SECONDARY    emc_clariion0_13 emc_clariion0 c8       -
sdaa         ENABLED(A) SECONDARY    emc_clariion0_14 emc_clariion0 c8       -
sdm          ENABLED(A) SECONDARY    emc_clariion0_14 emc_clariion0 c7       -
sdab         ENABLED(A) SECONDARY    emc_clariion0_15 emc_clariion0 c8       -
sdn          ENABLED(A) SECONDARY    emc_clariion0_15 emc_clariion0 c7       -
sde          ENABLED(A) SECONDARY    emc_clariion0_20 emc_clariion0 c7       -
sds          ENABLED(A) SECONDARY    emc_clariion0_20 emc_clariion0 c8       -
sdd          ENABLED(A) SECONDARY    emc_clariion0_21 emc_clariion0 c7       -
sdr          ENABLED(A) SECONDARY    emc_clariion0_21 emc_clariion0 c8       -

 

 

What could we check  further. ?

In what circumstances , it behaves as such.

 

 

There are no messages in messages file related to scsi/disks

 

 

Regards

S.

frankgfan
Moderator
Moderator
   VIP   

There are a couple of thing you can do.

they are listed below

 

1. Run rpm -aq | grep -i vxvm

2. vxdmpadm listctlr all

3. grep -i error /etc/vx/dmpevent.log | grep 2017

4. rm /dev/vx/(r)dmp/*

5. vxconfigd -k

6. vxdmpadm getsubpaths

 

if you still do not see any primary paths, check the enc clariion settings

frankgfan
Moderator
Moderator
   VIP   

There are a couple of thing you can do.

they are listed below

 

1. Run rpm -aq | grep -i vxvm

2. vxdmpadm listctlr all

3. grep -i error /etc/vx/dmpevent.log | grep 2017

4. rm /dev/vx/(r)dmp/*

5. vxconfigd -k

6. vxdmpadm getsubpaths

 

if you still do not see any primary paths, check the enc clariion settings