cancel
Showing results for 
Search instead for 
Did you mean: 

MultiNICA and RouteOptions

agathi
Not applicable

Hi,

I am having a Veritas Cluster running on Linux with two nodes, and each node has two physical IP addresses.
One address in 172.19.155.0/24 and one in 172.19.154.0/28.
The default gateway is 172.19.155.1 and I also need to have static routes towards some destinations via 172.19.154.129.

My MultiNICA agents  are as follows:
        MultiNICA mnica_om (
                Device @atcmdn1 = { eth7 = "172.19.155.42", eth0 = "172.19.155.42" }
                Device @atcmdn2 = { eth7 = "172.19.155.44", eth0 = "172.19.155.44" }
                NetMask = "255.255.255.128"
                Options = "broadcast 172.19.155.127"
                NetworkHosts = { "172.19.155.1" }
                )

        MultiNICA mnica_charging (
                Device @atcmdn1 = { eth1 = "172.19.154.131",
                         eth6 = "172.19.154.131" }
                Device @atcmdn2 = { eth1 = "172.19.154.132",
                         eth6 = "172.19.154.132" }
                NetMask = "255.255.255.192"
                Options = "broadcast 172.19.154.191"
                NetworkHosts = { "172.19.154.129" }
                )

I have seen that I have to use the RouteOptions parameter in main.cf.
For the default gateway I guess that I have to use:
MultiNICA mnica_om (
                Device @atcmdn1 = { eth7 = "172.19.155.42", eth0 = "172.19.155.42" }
                Device @atcmdn2 = { eth7 = "172.19.155.44", eth0 = "172.19.155.44" }
                NetMask = "255.255.255.128"
                Options = "broadcast 172.19.155.127"
                RouteOptions @atcmdn1 = "default gw 172.19.155.1 0"
                RouteOptions @atcmdn2 = "default gw 172.19.155.1 0"
                NetworkHosts = { "172.19.155.1" }

But what about the static routes via 172.19.154.129?
For example how can I add a static route towards 172.25.12.76/32 via 172.19.154.129?

Thanks,
Agathi

 

 

0 REPLIES 0