03-30-2017 07:02 PM - edited 03-30-2017 07:04 PM
Hi all,
I'm not sure if I'm doing things as it should so I'm posting my main.cf (attached) for you to help me check if I didn't miss anything.
The configuration includs two nodes node1 and node2.
I have two file systems /Data01 and /Data02 configured in separate failover service groups, by default the first file system is mounted on node1 and the second on node2.
I have also two other file systems /fs-03 and /fs-04 which are nfs shared, each file system is part of a separate service group with a vip each.
Thanks in advance
03-30-2017 10:22 PM
Can you put output of below commands ?
#vxdisk -o alldgs list
#vxprint -htg cfs04
#vxprint -htg cfs03
Suggestion :
If you are using CVM/CFS and you need to share CFS(filesystems mounted on both the nodes simultaneously), then I would suggest to use CNFS configuration.
Check Chapter 16 in below link...
You can certainly open a case with Tech Support to review the configuration.
03-31-2017 11:19 AM
Thanks bhoms for your reply,
I didn't yet implement the solution, will do it perhaps tomorrow and will share with you the outputs.
I know cnfs is better, but those are the requirement, but I will definitely suggest to implement cnfs.
Regards