cancel
Showing results for 
Search instead for 
Did you mean: 

What's the messages of cvm agent.

taesun
Level 3
Partner
Hello everyone.

My customer have CFS 5.0.1 on hp-ux 11.31.

I saw the VCS engine log. Here's the messages :

=======================================================================

$ tail -f /var/VRTSvcs/log/en*A*    
2010/08/25 09:59:04 VCS INFO V-16-2-13001 (oskrap1p) Resource(cvmvoldg1): Output of the completed operation (monitor) 
/opt/VRTSvcs/bin/CVMVolDg/monitor[31]: -:  not found.
2010/08/25 09:59:22 VCS INFO V-16-2-13001 (oskrap2p) Resource(cvmvoldg1): Output of the completed operation (monitor) 
/opt/VRTSvcs/bin/CVMVolDg/monitor[31]: -:  not found.
2010/08/25 10:00:05 VCS INFO V-16-2-13001 (oskrap1p) Resource(cvmvoldg1): Output of the completed operation (monitor) 
/opt/VRTSvcs/bin/CVMVolDg/monitor[31]: -:  not found.
2010/08/25 10:00:22 VCS INFO V-16-2-13001 (oskrap2p) Resource(cvmvoldg1): Output of the completed operation (monitor) 
/opt/VRTSvcs/bin/CVMVolDg/monitor[31]: -:  not found.
2010/08/25 10:01:05 VCS INFO V-16-2-13001 (oskrap1p) Resource(cvmvoldg1): Output of the completed operation (monitor) 
/opt/VRTSvcs/bin/CVMVolDg/monitor[31]: -:  not found.
=======================================================================

What is mean the "/opt/VRTSvcs/bin/CVMVolDg/monitor[31]: -:  not found." ?
I appreciate if any of you can offer me some advice.
1 ACCEPTED SOLUTION

Accepted Solutions

Anoop_Kumar1
Level 5

Hi Taesm,

This is a known bug with 5.0RP1 on hpux 11.31 and fixed in vcscvm-hpux1131-5.0.1RP1HF1 as per etrack  2038323.
I have not found any external link for abov patch, you can contact Symantec Support to get above patch. However, above issue is fixed in RP2 also.

Cheers !

View solution in original post

4 REPLIES 4

Gaurav_S
Moderator
Moderator
   VIP    Certified

does this monitor script exists ? can u check ls -l on that path

# ls -l /opt/VRTSvcs/bin/CVMVolDg/monitor

If it exists, can u paste the contents of monitor script....

also plz paste

# gabconfig -a
# hastatus -sum



Gaurav

taesun
Level 3
Partner
yes, this does.


$  ls -l /opt/VRTSvcs/bin/CVMVolDg/monitor
-rwxr--r--   1 root       sys           5486 Aug 13 15:11 /opt/VRTSvcs/bin/CVMVolDg/monitor
$ cksum /opt/VRTSvcs/bin/CVMVolDg/monitor       
1503281383 5486 /opt/VRTSvcs/bin/CVMVolDg/monitor

$cat /opt/VRTSvcs/bin/CVMVolDg/monitor 
#!/bin/sh
# @(#)src/common/vxvm/CVMVolDg/scripts/monitor  1.13 10/01/07 00:30:28 - 1999-2004
#ident "@(#)vcscvm:src/common/vxvm/CVMVolDg/scripts/monitor  1.13"
#
# Copyright (c) 1999-2004 Symantec Corporation.
# All rights reserved.
#
# THIS SOFTWARE CONTAINS CONFIDENTIAL INFORMATION AND TRADE SECRETS OF
# SYMANTEC CORPORATION.  USE, DISCLOSURE OR REPRODUCTION IS PROHIBITED
# WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF SYMANTEC CORPORATION.
#
# The Licensed Software and Documentation are deemed to be "commercial
# computer software" and "commercial computer software documentation"
# as defined in FAR Sections 12.212 and DFARS Section 227.7202.
#
 
# This is the monitor script for a CVM shared disk group.
 
cvmvoldg_nvols=0
# source the library
# parse the command line arguments.
cvmvoldg_resname=$1
cvmvoldg_dgname=$2
cvmvoldg_nvols=$3
cvmvoldg_catid=20007
 
VCSHOME="${VCS_HOME:-/opt/VRTSvcs}"
. $VCSHOME/bin/ag_i18n_inc.sh
VCSAG_SET_ENVS $cvmvoldg_resname $cvmvoldg_catid
 
. /opt/VRTSvcs/bin/CVMVolDg/cvmvoldg.lib
 
trap "" 3
 
##################### M A I N #####################
 
_funcname=main
echo_trace_enter
 
VXPRINT_TMPFILE="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_tmp"
VCS_VOL_STAT="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_stat"
VCS_VXNOTIFY_FILE="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_vxnotify"
VCS_PRN="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_tmp"
VXNOTIFY_SUM_STORE="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_sumstore"
VXNOTIFY_PID="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_pid"
VXPRINT_TMPFILE="/var/VRTSvcs/lock/${cvmvoldg_resname}_${cvmvoldg_dgname}_tmp"
 
shift 3
 
# create volume list. This will eat up all the volumes too
cvmvoldg_make_vollist _cvm_res $cvmvoldg_nvols $*
if [ $_cvm_res -ne 0 ] ; then
        VCSAG_LOG_MSG "W" "could not create volume list" 1034
         _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
        exit $CVMVOLDG_MONITOR_FAILURE
fi
shift $cvmvoldg_nvols
 
cvmvoldg_activation=$1
 
echo_debug "monitor: activation requested is $cvmvoldg_activation"
echo_debug "monitor: nvols is $cvmvoldg_nvols"
echo_debug "monitor: dg is $cvmvoldg_dgname"
echo_debug "monitor: resource name is $cvmvoldg_resname"
echo_debug "monitor: volume list is <$cvmvoldg_vollist >"
 
# do initial condition testing. The reason we don't print a warning 
# message here is because VCS will keep calling monitor for resources
# that are offline too just to make sure that the resource are offline.
# That means a whole lot of messages for resource that are offline.
cvmvoldg_monitor_setup _cvm_res
if [ $_cvm_res -ne 0 ] ; then
        _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
        exit $CVMVOLDG_MONITOR_FAILURE
fi
 
# if something happened to notify, we will have to restart it. However, that
# means that we will also have to do all verification that was done in the
# online script again.
 
# we check for all initial conditions, like dgs being imported etc, and then
# start vxnotify. There is a hole in there that the conditions can change.
# Fix that.
 
cvmvoldg_check_notify_health _cvm_res
if [ $_cvm_res -ne 0 ] ; then
 
        VCSAG_LOG_MSG "W" "vxnotify killed. rechecking status" 1035
 
        # store the output of the vxprint
        cvmvoldg_save_vxprint $VXPRINT_TMPFILE _cvm_res $VXPRINT_TMPFILE_FMTED
        if [ $_cvm_res -ne 0 ] ; then
                VCSAG_LOG_MSG "E" "Error saving vxprint output" 1036
                 _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
                exit $CVMVOLDG_MONITOR_FAILURE
        fi
 
        # check everything again
        cvmvoldg_check_all "MONITOR" _cvm_res
        if [ $_cvm_res -ne 0 ] ; then
                VCSAG_LOG_MSG "E" "Recheck of status check failed" 1037
                 _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
                exit $CVMVOLDG_MONITOR_FAILURE
        fi
 
        cvmvoldg_setup_notify _cvm_res
        if [ $_cvm_res -ne 0 ] ; then
                VCSAG_LOG_MSG "E" "Can not restart vxnotify. Failed" 1038
                 _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
                exit $CVMVOLDG_MONITOR_FAILURE
        fi
 
        # setup vxstat
        cvmvoldg_setup_stat 
 
        # since we reset everything then we don't need to check the 
        # vxnotify sum_stat file. Just exit with success now.
        _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_SUCCESS
        exit $CVMVOLDG_MONITOR_SUCCESS
fi
 
# check everything again in case node died and got live again.
cvmvoldg_check_all "MONITOR" _cvm_res ####
if [ $_cvm_res -ne 0 ] ; then
        VCSAG_LOG_MSG "E" "Recheck of status check failed" 1037
        _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
        exit $CVMVOLDG_MONITOR_FAILURE
fi
 
# vxnotify is fine. If nothing changed, then just return.
cvmvoldg_check_notify_status _cvm_res
if [ $_cvm_res -eq 0 ] ; then
 
        # try doing IO to volumes
        cvmvoldg_do_iotest 0 _cvm_res
        if [ $_cvm_res -ne 0 ] ; then
                VCSAG_LOG_MSG "E" "IO test failed" 1073
                _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
                exit $CVMVOLDG_MONITOR_FAILURE
        fi      
 
 
        _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_SUCCESS
        exit $CVMVOLDG_MONITOR_SUCCESS
fi
 
# see if anything changed that should not have. cvmvoldg_parse_notify_op will
# print correct log messages to the enging_A.log
cvmvoldg_parse_notify_output _cvm_res
if [ $_cvm_res -eq 0 ] ; then
        echo_debug "monitor: monitor returning success"
else
        VCSAG_LOG_MSG "E" "monitor failed" 1039
        _funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_FAILURE
        exit $CVMVOLDG_MONITOR_FAILURE
fi
 
_funcname=main && echo_trace_exit $CVMVOLDG_MONITOR_SUCCESS
exit $CVMVOLDG_MONITOR_SUCCESS

===========================================
[root@HP-oskrap1p]/>$ gabconfig -a
GAB Port Memberships
===============================================================
Port a gen   66df28 membership 01
Port b gen   66df27 membership 01
Port f gen   66df32 membership 01
Port h gen   66df2a membership 01
Port v gen   66df2d membership 01
Port w gen   66df2f membership 01
[root@HP-oskrap1p]/>$ hastatus -sum
 
-- SYSTEM STATE
-- System               State                Frozen              
 
A  oskrap1p             RUNNING              0                    
A  oskrap2p             RUNNING              0                    
 
-- GROUP STATE
-- Group           System               Probed     AutoDisabled    State          
 
B  cfs             oskrap1p             Y          N               ONLINE         
B  cfs             oskrap2p             Y          N               ONLINE         
B  cvm             oskrap1p             Y          N               ONLINE         
B  cvm             oskrap2p             Y          N               ONLINE 

$ swverify VRTSperl
 
=======  08/25/10 12:21:01 KST  BEGIN swverify SESSION
         (non-interactive) (jobid=oskrap1p-0121)
 
       * Session started for user "root@oskrap1p".
         
       * Beginning Selection
       * Target connection succeeded for "oskrap1p:/".
       * Software selections:
             VRTSperl.VRTSPERL,l=/opt/VRTSperl,r=5.8.8.10,a=HP-UX_B.11.31_IA/PA,v=Symantec,fr=5.8.8.10,fa=HP-UX_B.11.31_IA/PA
       * Selection succeeded.
         
         
       * Beginning Analysis
       * Session selections have been saved in the file
         "/.sw/sessions/swverify.last".
       * The analysis phase succeeded for "oskrap1p:/".
       * Verification succeeded.
         
         
NOTE:    More information may be found in the agent logfile using the
         command "swjob -a log oskrap1p-0121 @ oskrap1p:/".
 
=======  08/25/10 12:21:05 KST  END swverify SESSION (non-interactive)
         (jobid=oskrap1p-0121)
 

Anoop_Kumar1
Level 5

Hi Taesm,

This is a known bug with 5.0RP1 on hpux 11.31 and fixed in vcscvm-hpux1131-5.0.1RP1HF1 as per etrack  2038323.
I have not found any external link for abov patch, you can contact Symantec Support to get above patch. However, above issue is fixed in RP2 also.

Cheers !

taesun
Level 3
Partner
Thanks for help me.