cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server

Discussion Posts

Resolved! Echo message (Request/Response) Monitor

Environment OS = Linux 6x/7x SFHA = Suppose latest i.e 6x Query: We have a two nodes local HA. A customized application running on it(HA) fine. The customized application send a tcp echo response (800) on the tcp echo request of (810) from a mach...

Zahid_Haseeb by Moderator
Partner    VIP    Accredited
  • 1178 Views
  • 9 replies
  • 0 kudos

Resolved! gco

hi, i understand that a gco is a virtual(global) cluster formed from 2 vcs clusters each one in a separate site.the heartbeat between nodes from the sites goes over the wan?the gab traffic that updates all the nodes between the 2 sites,goes over thi...

Resolved! gco fencing

hi, i think that vxfencing could be setup only within evey cluster from every site.i am not aware if vxfencing could be setup as global fencing.suppose i have a node in site 1 and other node in site 2,and a failover group uses node1 or node2.if the ...

Resolved! fault of primary node in a global cluster

Hi Guy. I have a global cluster formed by 2 mini-cluster of one node only each one synchronized in asynchronous mode. I wanted to simulate a fault of primary node with solaris command 'halt' root@MILWB02S # hagrp -state AppService #Group ...

tgenova by Level 4
  • 2891 Views
  • 13 replies
  • 1 kudos

Resolved! global vcs

hi, if i have node a and b in site 1 and node c and d in site 2,then if i wish to configure them into global vcs in this way-nod a and node c serve a failover group and node b and d serve a parallel group. i saw if i wish to setup gco first in site...

Resolved! vcs thing

hi, i wish to ask a couple of this all related. i could have failover and parallel service groups in the same vcs.right? in my opinion would be better if i setup a different vcs only for failover services and another for parallel services rather t...

Resolved! When can 'hasys -nodeid' fail?

Dear All, We are running VCS Engine version 6.1.0.000 and need to use 'hasys -nodeid'  to  get info about the node. So in what scenario can this command fail  ? Also in VCS  6.1 . , the man page info for this command states that it will display th...

Resolved! Disk space reporting

I'm runing VCS 5.0 and have a SG with NFS shares off a RAID from the two servers in my cluster. The problem I'm running into is a conflict of how much disk space is being used with a "df" compared to a "du". One of the file systems is off by 36GB. We...

Resolved! False reporting by VCS Host Monitor

    May 25 03:54:10 node-02 Had[8671]: [ID 702911 daemon.notice] VCS CRITICAL V-16-1-50086 CPU usage on node-02 is 91% May 25 03:55:09 node-02 Had[8671]: [ID 702911 daemon.notice] VCS CRITICAL V-16-1-50086 CPU usage on node-02 is 95% May 25 04:52...

symsonu by Level 6
  • 1693 Views
  • 5 replies
  • 0 kudos

Resolved! Cluster node not starting as one node is down.

Hi Experts, Need help in understanding cluster of 1+1 , my master node is down due an OS issue and now the slave node should ideal takeover but i see it is not starting. Attached is the Engine.log where i can see some "ShutdownTimeout" , please let...

Resolved! Veritas cluster migrating to a new array.

We have veritas cluster version -5 running on solaris 10. We need to migrate the storage to a new array. Mirrioring volumes is not possible as there are many diskgroups and volumes. The plan is to sync all the LUN's to new array and siwtch the cables...

sreeks by Level 2
  • 1922 Views
  • 3 replies
  • 1 kudos

Slowness Issue while accessing File Shares on FS cluster

Hi Friends, Need your suggestions on the following issue: We have a veritas cluster configured on our File Servers with a Replication DR site. We patched up the Nodes : A lot of our users have been reporting about slowness in accessing these file ...

SukhoiMk30 by Level 2
Partner Accredited
  • 658 Views
  • 2 replies
  • 1 kudos

Resolved! SFHA 6.1 / MirrorView Agent supported over Windows 2012 R2?

Hi, I see on SORT that the MirrorView agent is supported on Windows 2102 with SFHA 6.1 or 6.0.2, but i don't see an official support with Windows 2012R2. I installed a NetBackup cluster (7604) with SFHA 6.1 on Windows 2012R2 and the MirrorView agen...

Stephane_COLIN by Level 4
Partner Accredited Certified
  • 1397 Views
  • 2 replies
  • 0 kudos

Migrate SFHA5.0 MP1 to new hardware

Dear all, Due to hardware problem, we would like migrate the whole cluster to a pair of new servers. The SFHA would like to keep to current versions SFHA 5.0 MP1 (Solaris sparc) but the Oracle single instance would like to upgrade from 10.2.0.3 to l...

kat1234 by Level 4
Partner Accredited
  • 801 Views
  • 4 replies
  • 0 kudos

Resolved! SFHA "In-Family" Upgrade ?

While discussing options to upgrade SFHA cluster (standard, phased, rolling), the topic of  "In-Family" upgrade was mentioned. I have never heard of this, so want to ask if anyone has experience with In-Family upgrade ? The concept is that In-Family...

Haniwa by Level 4
Partner Accredited Certified
  • 910 Views
  • 2 replies
  • 0 kudos