hi folks
In a cluster with 3 heartbeats, all correctly configured but a cable was plugged into the wrong port, so naturally lltstat reported down and dlpiping couldn't talk.
I moved the cable to the correct port and i set the mac addresses for the heartbeat that was down using lltconfig but lltstat still reports down. dlpiping can now connect over heartbeat. is there something else i need to do?
here is some output
lltstat -nvv
LLT node information:
Node State Link Status Address
0 host01 OPEN
ce2 DOWN 00:00:00:00:00:E2
ce5 UP 00:00:00:00:00:FD
ce1 UP 00:00:00:00:00:E1
* 1 host02 OPEN
ce2 UP 00:00:00:00:00:5E
ce5 UP 00:00:00:00:00:48
ce1 UP 00:00:00:00:00:5D
cat /etc/llttab
set-node host02
set-cluster 200
link ce2 /dev/ce:2 - ether - -
link ce5 /dev/ce:5 - ether - -
link-lowpri ce1 /dev/ce:1 - ether - -
exclude 2-31
lltconfig -a list
Link 0 (ce2):
Node 0 host01: 00:00:00:00:00:E2 permanent
Node 1 host02: 00:00:00:00:00:5E permanent
Link 1 (ce5):
Node 0 host01: 00:00:00:00:00:FD
Node 1 host02: 00:00:00:00:00:48 permanent
Link 2 (ce1):
Node 0 host01: 00:00:00:00:00:E1
Node 1 host02: 00:00:00:00:00:5D permanent
many thanks
sjack