10-21-2021 05:38 AM
Hello,
we can see the following behaviour with the diskmap regkey.
https://www.veritas.com/support/en_US/article.100000606
There are partitions were are nearly 100% full but which are not in use anymore.
The data was moved. However the admin service stopped because of the size monitoring.
The event log says the partition N:\ and K:\ are rearly full.
On the server is no partition available with drive letter N.
We can see that the drive letters are "shifted"
N=K and K=H
So we excluded the drive "H" which has the value from N.
The ev server version is 12.4.1
Does anyone know this behaviour?
Kind regards,
Lucas Häussler
10-21-2021 05:52 AM - edited 10-21-2021 05:54 AM
Hello Lucas,
If I read that article, I understand that (following your listing to drive K), you get below 'numbers'
c = 4
d = 8
e = 16
f = 32
g = 64
h = 128
i = 256
j = 512
k = 1024
l = 2048
m = 4096
n = 8192
In your case, if you get a warning for N and K, the value should be 8192+1024 = 9216
That is, if I understand it correct :)
<added>You can also disable this monitoring for these completely. See https://www.veritas.com/support/en_US/article.100017740
10-21-2021 06:25 AM
Hello Gertjan,
yes you are right. We implemented the value 9216 but the error were still appearing.
We also tested the values 128 for h and 8192 for n. Same behaviour.
But after we set the value for k (1024) the message regarding the h drive letter was gone.
It seems the drive letters are incorret for ev.
Best regards.