04-15-2015 08:22 AM
Hello,
I tried adding a file server as target on the vault admin console but the VAC crashes with the response below:
Also attached is a log from the dtrace done. Highlighted in yellow towards the end of the log is possible error.
Kindly assist. Thanks
Solved! Go to Solution.
06-19-2015 05:17 AM
Yes it got resolved, i did a rerun of the installation disk. Thanks
04-15-2015 08:34 AM
What version, and service pack of EV is this? Is it directly on the EV server, or a remote console?
04-16-2015 02:00 AM
Thanks Rob,
The Enterprise Vault product version is 10.0.4.1189 installed on Microsoft Windows Server 2008 R2
It occurs directly on the EV server.
Anticipate your response.
04-16-2015 02:00 AM
Thanks Rob,
The Enterprise Vault product version is 10.0.4.1189 installed on Microsoft Windows Server 2008 R2
It occurs directly on the EV server.
Anticipate your response.
04-16-2015 09:44 AM
I would suggest logging a call with Symantec Support. You may also, before that, if you haven't already:
a/ Reboot the EV server
b/ Check what Antivirus exclusions you have got in place
c/ Install the console on a Workstation .. and try from there.
06-19-2015 03:32 AM
Did you resolve this issue?
06-19-2015 05:17 AM
Yes it got resolved, i did a rerun of the installation disk. Thanks
06-19-2015 06:24 AM
Hi Ojay,
Can you mark one of the entries as 'solution'?
thanks.