Entreprise Vault 10 and Exchange 2010 DAG

[Moroccosun]

salut tous le monde , ,

Est-ce que outlook add in doit être installer manuellement sur chaque client utiliser Outlook, ou il y a une procédure de déploiement automatique.

Est-ce Outlook Extension doit être installé uniquement sur le serveur Cas exchange pour affiche le Menu d’archivage  sur l’OWA.

Sur une configuration DAG exchange 2010 avec 3 serveurs , il ya une configuration spécifique a mettre sur les serveurs.

Merci pour votre help ,

----------------------------------------------------------------------

HI

Does outlook add in must be installed manually on each client using Outlook, or there is an automated deployment process. 
Is Outlook Extension must be installed only on the server Cas exchange for archiving Menu displays on the OWA. 
On an exchange 2010 DAG configuration with three servers, there is a specific configuration to put on the servers. 
Thank you for your help, 

[TonySterling]

You can use whatever method you prefer to deploy the Outlook add-in to end users, it doesn't need to be installed manually.

As for OWA, the EV OWA extensions, not the Outlook Add-in, need to be installed on the CAS servers.  Just follow the instructions in the Setting up Exchange Server Archiving Guide.

[Moroccosun]

Thank you for your reply

If possible send me a link explains how to configure Outlook and OWA add in extension.

is that both must be installing the CAS server.

thank you

[TonySterling]

I attached the doc that has the steps to configure the OWA exentions. 

As I said, you DO NOT install the Outlook add-in on the CAS server, you install the OWA extensions.  Just give the documenta read and it should answer your questions.

In regards to deploying the Outlook Add-in to end users, how do you typically deploy software?

You can review these:

Enterprise Vault Outlook Add-In for Exchange Server archiving

Article:HOWTO58021

|

Created: 2011-08-01

|

Updated: 2012-09-23

|

Article URL http://www.symantec.com/docs/HOWTO58021

Publishing the Outlook Add-In in Active Directory for Exchange Server archiving

Article:HOWTO58025

|

Created: 2011-08-01

|

Updated: 2012-09-23

|

Article URL http://www.symantec.com/docs/HOWTO58025

Setting up manual installation of the Outlook Add-In

Article:HOWTO74984

|

Created: 2012-03-31

|

Updated: 2012-09-23

|

Article URL http://www.symantec.com/docs/HOWTO74984

[TonySterling · Accepted solution]

This also would be a good read, it was written for EV 9 but the principles apply for EV 10.

Enterprise Vault 9 Archiving from Exchange 2010

Article:TECH144726

|

Created: 2010-11-22

|

Updated: 2010-12-14

|

Article URL http://www.symantec.com/docs/TECH144726

[Moroccosun]

Thank you dear friend

Very good link;

OWA extension: installation in CAS server

Outlook add in: Deployment via GPO on the client outlook station.

I have 3 server exchange 2010 with mode and 30 database server sharing among members.

is that the 3 server DAG member will be added to the exchange Targets.

Thank you