cancel
Showing results for 
Search instead for 
Did you mean: 

Moving EV indexes from EMC to NetApp

Sarah_Seftel1
Level 6
Partner Accredited

Hello,

Quick question, should there be any issue if a customer wants to change the index disks from EMC to NetApp?

Is there anything that should be done differently?

As I see it it is the same as replacing index disk:

copy all the data in the background
take services down
copy last minute index changes
change the disks
make sure path and disk drive letter are the same
bring services up

 

sounds ok? or is the EMC to NetApp is trickier than what I think?

 

1 ACCEPTED SOLUTION

Accepted Solutions

GertjanA
Moderator
Moderator
Partner    VIP    Accredited Certified

Hi Sarah,

I performed the action for EV9 following this doc: http://www.symantec.com/docs/TECH51450

The document for EV10/11 is here:  http://www.symantec.com/docs/HOWTO82325

Greetings!

 

 

Regards. Gertjan

View solution in original post

3 REPLIES 3

GertjanA
Moderator
Moderator
Partner    VIP    Accredited Certified

Hello Sarah,

I've done the same excercise a few years ago at another customer. Following the steps to 'replace index-disk' works fine.

 

Regards. Gertjan

Sarah_Seftel1
Level 6
Partner Accredited

Any specific TN on that Gertjan?

As all I can find it how to change location which I'm sure it's the same...

 

GertjanA
Moderator
Moderator
Partner    VIP    Accredited Certified

Hi Sarah,

I performed the action for EV9 following this doc: http://www.symantec.com/docs/TECH51450

The document for EV10/11 is here:  http://www.symantec.com/docs/HOWTO82325

Greetings!

 

 

Regards. Gertjan