cancel
Showing results for 
Search instead for 
Did you mean: 

Outlookanywhere Error (COM) synchronizing: 0xFFFFFFFF

bilalaker
Level 3
Partner
Hi, local and external adresses are like below.  vault1.akr.local(10.0.0.128)  --> vault sever local adress mail1.akr.local (10.0.0.127)--> exchange local adress vault.aker.com --> vault external adress mail.aker.com --> mail server external adress  Vault.aker.com has an external ip 195.xx.199.128 Mail.aker.com has an external ip 195.xx.199.127 On checkpoint Firewall  smtp,https request to 195.xx.199.128(mail.aker.com) direct to 10.0.0.128(mail1.akr.local) https request to 195.xx.199.127(vault.aker.com) direct to 10.0.0.127(vault1.akr.local) On local network everything works normal When using outlook anywhere they can do restore and store process. (Just asking credential again at first time)  But syncronizing to virtual vault it gives error. I haven't found any solution yet.  The client log is like below. If need i will put the max tracing client log. 11/01/2013 21:06:09.175[3616][H]: User initiated 'Synchronize Vault Cache'. 11/01/2013 21:06:09.183[7144][H]: HDR:SYNC: Pre-processing.  Type:MANUALLY INITIATED 11/01/2013 21:06:09.185[7144][H]: HDR: Sync status:19 11/01/2013 21:06:09.201[4076][H]: CONTENT:STORE: [Offline Config] Maximum Store Size (MB): 1024 11/01/2013 21:07:09.188[6092][H]: HaveConnection::CallBack - HttpQueryInfo failed 0x80070006 (6) : The handle is invalid. 11/01/2013 21:07:09.210[7144][H]: HDR:SYNC: Updating MDC map 11/01/2013 21:07:09.211[7144][H]: HDR:SYNC: Getting accessible archives 11/01/2013 21:07:09.212[7144][H]: HDR: Requesting page: ListArchives.aspx?x=evoutlookext&evhost=https://akrvault.akr.local/EVAnon 11/01/2013 21:07:09.245[7144][H]: HDR:SYNC: Error (COM) synchronizing: 0xFFFFFFFF 11/01/2013 21:07:09.245[7144][H]: HDR:SYNC: Failed 11/01/2013 21:07:09.246[7144][H]: HDR: Sync status:-1 Any advice?
1 ACCEPTED SOLUTION

Accepted Solutions

JesusWept3
Level 6
Partner Accredited Certified
It's not a duplicate its just an extension to the other one I seem to remember on the previous thread it was because it was pointing to EvAnon virtual directory and not EnterpriseVaultDirectory And the issue there is that EVanon uses anonymous access under the EvAnon account that was set up as opposed to EnterpriseVault virtual directory which uses IWA/Basic, so what's happening is its an authentication issue more likely than not
https://www.linkedin.com/in/alex-allen-turl-07370146

View solution in original post

9 REPLIES 9

Rob_Wilcox1
Level 6
Partner

Please show the desktop information section of the client log - because you've not included any version information.

Working for cloudficient.com

AndrewB
Moderator
Moderator
Partner    VIP    Accredited

it's posted here

https://www-secure.symantec.com/connect/forums/symantec-enterprise-vault-10-outlook-anywhere-using-checpoint

Rob_Wilcox1
Level 6
Partner

hmm, duplication of effort, i see...  said Yoda.

Working for cloudficient.com

JesusWept3
Level 6
Partner Accredited Certified
It's not a duplicate its just an extension to the other one I seem to remember on the previous thread it was because it was pointing to EvAnon virtual directory and not EnterpriseVaultDirectory And the issue there is that EVanon uses anonymous access under the EvAnon account that was set up as opposed to EnterpriseVault virtual directory which uses IWA/Basic, so what's happening is its an authentication issue more likely than not
https://www.linkedin.com/in/alex-allen-turl-07370146

bilalaker
Level 3
Partner

Hi,
I couln't understand clearly.
Vault server uses vaultadmin system account. 

Evanon directory did not create after Vault installation. so I run OWAUser.wsf
On IIS At Evanon directory at basic setting on connect as tab, I select "vaultiis" user which is created on DC .

EnterpriseVault directory--> asp.net Impersonation, Basic,Windows Authantication
Evanon directoy -->Anoymous , ASP.net Impersonation

thanks..

bilalaker
Level 3
Partner

Additionally, 

At Desktop policy,  Rpc over Http connection is direct URL:https://vault.aker.com/EnterpriseVault
Use Proxy sertting, Web Application URL: Https://akrclustervault.akr.local/EnterpriseVault

akrcluster vault is cluster ip adress of vault1 and vault2

 

bilalaker
Level 3
Partner

hi,

Using Outlook anywhere I can do manually restore and store process but when i press syncronize button.
İt gives error: not connect to EVserver.

At client log it gives Could not contact the EV web server using the RPC over HTTP URL (https://vault.aker.com/EnterpriseVault)

 

But I can connect it via internet explorer. And I can search archive items.

 

ArchiveOnlyWithAttach = 0 [Desktop Setting]
13/01/2013 09:53:07.297[5960][M]:     Desktop Setting: RESTRICTPOLICYLOOKUP
13/01/2013 09:53:07.277[5964][M]:     Desktop Setting: RESTRICTPOLICYLOOKUP
13/01/2013 09:53:07.303[5964][M]:     No Value
13/01/2013 09:53:07.305[5964][M]:     Desktop Setting: RPCOVERHTTPUSEDIRECTCONNECTION
13/01/2013 09:53:07.308[5964][M]:     No Value
13/01/2013 09:53:07.310[5964][M]:  RPCOVERHTTPUSEDIRECTCONNECTION = 0 [default]
13/01/2013 09:53:07.312[5964][M]: HDR: Could not contact the EV web server (https://akrvault.akr.local/EnterpriseVault) directly, trying the EV RPC over HTTP URL
13/01/2013 09:53:07.317[5964][M]:     Desktop Setting: RPCOVERHTTPCALCPROXYURL
13/01/2013 09:53:07.320[5964][M]:     Value: https://vault.aker.com/EnterpriseVault
13/01/2013 09:53:07.323[5964][M]: HaveConnection::ExecuteTest (151681035) - Starting connection
13/01/2013 09:53:07.327[5964][M]: HaveConnection::ExecuteTest - Connection test to: vault.sarkcell.net/EnterpriseVault/clienttest.gif failed
13/01/2013 09:53:07.331[5964][M]: HaveConnection::ExecuteTest (151681035) - Ending connection
13/01/2013 09:53:07.334[5964][M]: HDR: Could not contact the EV web server using the RPC over HTTP URL (https://vault.aker.com/EnterpriseVault)
13/01/2013 09:53:07.339[5964][H]: HDR:SYNC: EnterpriseVault is inaccessible.
13/01/2013 09:53:07.342[5964][H]: HDR:SYNC: Could not connect to EV
13/01/2013 09:53:07.347[5964][H]: HDR:SYNC: Failed
13/01/2013 09:53:07.348[5964][H]: HDR: Sync status:-4
13/01/2013 09:53:07.357[5964][M]: HDR:SYNC: scheduled:1, lastSync:1678381533, schedSyncTimeNeedsMoving:0, updateLastGoodSyncTime:0, failed:1
13/01/2013 09:53:07.299[5960][M]:     No Value
13/01/2013 09:53:07.368[5960][M]:     Desktop Setting: UseLargeItemsSize

 

bilalaker
Level 3
Partner

Any Advice? 

Rob_Wilcox1
Level 6
Partner

I'm confused as to which thread we're discussing things on.. but hey ho.

 

I'd do a fiddler trace if possible (or netmon) or similar when trying for :

 

vault.sarkcell.net/EnterpriseVault/clienttest.gif

 

You say 'it works' when you do it.  Are you checking the response code which comes back? Have you got the full client log around the time of the synch?

Working for cloudficient.com