02-26-2013 09:00 AM
I'm looking at the 5220 Admin Guide and it says that for SAN Client Fibre you have to have a C or D model and it must have an fibre HBA in specific slots.
Well....we've got two 5220's that I'd love to hook up that way but those slots are occupied by a 10 GB adapter, not an HBA...and there's nothing in the product docs that shows that configuration.
So how can I tell what model I have and, if those 10 GB adapters are HBA's, how can I read their WWN's so I can give them to our Fibre Admin?
Solved! Go to Solution.
02-26-2013 11:59 AM
Please refer to the tables and photos on pages 22-25 of this Guide - does this help at all?
From the CLISH, you can use Manage > FibreChannel > Show to see WWNs.
Hope this helps!
02-26-2013 11:15 AM
How old is the appliance?
02-26-2013 11:59 AM
Please refer to the tables and photos on pages 22-25 of this Guide - does this help at all?
From the CLISH, you can use Manage > FibreChannel > Show to see WWNs.
Hope this helps!
02-26-2013 12:47 PM
That's exactly what I needed. We've got a C so we can only connect tape drives via fibre.
I'll have to make sure that future purchases are D or E models (or future models since it takes forever to get purchases approved).