07-30-2015 11:40 PM
Hi,
Recently we have two new appliances 5230 and in the integration with the supervision system we will need to test the SNMP traps. I read the documentation and I don't found nothing about to send a test trap to test SNMP.
How i can test the SNMP for see that send correctly to the supervision system?
Solved! Go to Solution.
07-31-2015 03:37 PM
I believe this documentation may help you:
07-31-2015 01:19 AM
Hi,
Review this note https://support.symantec.com/en_US/article.HOWTO94055.html
07-31-2015 03:37 PM
I believe this documentation may help you:
08-03-2015 01:49 AM
Hi, I revised the information buy I don't know how I make a test from Appliance to server that collect the traps SNMP. In this document http://symantec.com/docs/TECH208354 appear something about a command and script but i don't understand how to configure the options.
08-03-2015 12:29 PM
You still have not revealed the version on your Appliance?
From the TechNote, it looks like you need to issue a command from the Appliance such as:
snmptrap -Ci -v 2c -c public -t 2 <IP.addr.of.server> '' 1.3.6.1.4.1.393.3.9.1.16 1.3.6.1.4.1.393.3.9.1.16 i 1
08-04-2015 12:50 AM
Ok, I don't know that we need to elevate to root for test SNMP.
We launch the command and the output:
snmpinform: Timeout
read_config_store open failure on /var/lib/net-snmp/snmpapp.conf
read_config_store open failure on /var/lib/net-snmp/snmpapp.conf
read_config_store open failure on /var/lib/net-snmp/snmpapp.conf
What's the meaning of this output? It's a problem with the configuration or a problem with the comunication.
The version of the Appliance is 7.6.0.4 on Appliance 5230.
Regards.
08-04-2015 08:45 AM
I Googled your error and it seems to indicate that the user running the snmpinform command does not have write privileges on /var/lib/net-snmp, but as this is not a NetBackup error, we have now moved firmly out of an area where I feel I can offer authoritative advice. ;) Good luck!
(For instance, http://sourceforge.net/p/net-snmp/bugs/1706/)
08-04-2015 09:07 PM
Please post everything you're doing up to the error.
08-07-2015 03:48 AM
hello,
I test again and the only that appear in the appliance console is :
appliance:/home/maintenance # snmptrap -Ci -v 2c -c public -t 2 10.252.48.222 '' 1.3.6.1.4.1.393.3.9.1.16 1.3.6.1.4.1.393.3.9.1.16 i 1
snmpinform: Timeout
I put a snoop in the remote host that receive the SNMP Traps :
appliance-> ov-lh UDP D=162 S=34170 LEN=100
appliance-> ov-lh UDP D=162 S=34170 LEN=100
appliance-> ov-lh UDP D=162 S=34170 LEN=100
appliance-> ov-lh UDP D=162 S=34170 LEN=100
appliance-> ov-lh UDP D=162 S=34170 LEN=100
appliance-> ov-lh UDP D=162 S=34170 LEN=100
appliance-> ov-lh UDP D=162 S=39110 LEN=100
appliance-> ov-lh UDP D=162 S=39110 LEN=100
I see the traffic buy i don't see the traps. It's normal that we have a Timeout?
Regards
09-01-2015 02:53 AM
Hello,
I test again the trapsSNMP and finally works.
Thank you so much.