cancel
Showing results for 
Search instead for 
Did you mean: 

Check the Serial No of storage shelf remotely

Hi all,

Is there any method to check the appliance storage shelf's serial number remotely? 

Inside the web conosle I cannot find any information related to the serial number of the storage shelf!

 

Thanks a lot!

1 Solution

Accepted Solutions
Accepted Solution!

I've been here.  Own over 40

I've been here.  Own over 40 appliances and about 70 Shelves.  Here is what you do.  

 

Clish > Support > Data Collect

When it finishes

Maintenance 

Go to /tmp

Make a folder and copy the DataCollect.zip file you just created to it.  

cd into your dir and  unzip DataCollect.zip

The file you want is called Raid-Card-Enclosure-Info-log_(todays date).log

Use the view command to opening it.  The serial numbers are listed under Vender ID and Product ID match and start with TB.. There will be one section like this per shelf.  

Example 

VendorID and Product ID didnt match
    FRU Part Number               : N/A
    Enclosure Serial Number       : N/A
    ESM Serial Number             : N/A
    Enclosure Zoning Mode         : N/A
    Partner Device Id             : #####

    Inquiry data                  :
        Vendor Identification     : Promise
        Product Identification    : J630s
        Product Revision Level    : 060=
        Vendor Specific           : TB00#############    0000 (I put hash where my numbers are 

 

Sully

 

View solution in original post

6 Replies

Hi,   Here you

Hi,

 

Here you go.

 

http://www.symantec.com/docs/TECH187222

 

#EDIT Sorry, saw you need the storage not the appliance itself.

Hi,   You can use Support >

Hi,

 

You can use Support > Test Hardware

 

 

Take a look at the IPMI

Take a look at the IPMI interface - donthave one to hand to check but i think you may be able to get it from there

Accepted Solution!

I've been here.  Own over 40

I've been here.  Own over 40 appliances and about 70 Shelves.  Here is what you do.  

 

Clish > Support > Data Collect

When it finishes

Maintenance 

Go to /tmp

Make a folder and copy the DataCollect.zip file you just created to it.  

cd into your dir and  unzip DataCollect.zip

The file you want is called Raid-Card-Enclosure-Info-log_(todays date).log

Use the view command to opening it.  The serial numbers are listed under Vender ID and Product ID match and start with TB.. There will be one section like this per shelf.  

Example 

VendorID and Product ID didnt match
    FRU Part Number               : N/A
    Enclosure Serial Number       : N/A
    ESM Serial Number             : N/A
    Enclosure Zoning Mode         : N/A
    Partner Device Id             : #####

    Inquiry data                  :
        Vendor Identification     : Promise
        Product Identification    : J630s
        Product Revision Level    : 060=
        Vendor Specific           : TB00#############    0000 (I put hash where my numbers are 

 

Sully

 

View solution in original post

or if you don't like using

or if you don't like using view you can also use cat. 

cat Riad-Card-Enclosure-Info-Log_(todays date).log | grep 'Vendor Specific'

and that will show you just the serial number lines.  

 

Sully. 

Hi,   Did you test the

Hi,

 

Did you test the suggestions?