04-12-2015 10:13 AM
Just attempted upgrading our 5230 appliance from 2.6.0.3 to 2.6.1.1 and after running for about 2 hrs or so, it failed with the following email:
Command install_NB_rpm failed to execute.
An UpgradeStatus command shows the following:
The software upgrade process failed. The appliance is rolling back to a pre-upgrade state using the Pre-upgrade checkpoint!
The following EEB's are installed on the appliance:
ET3592475-2.6.0.3-1
ET3538035-2.6.0.3-1
After some searching, I ran into another post on the forums indicating an upgrade failure with ET3592475-2.6.0.3-1 installed.
I have found the following article which indicates an updated version of this EEB.
http://www.symantec.com/docs/TECH223591
It's a little unclear whether the new version ET3592475-2.6.0.3-2 actually resolves issues preventing the upgrade or not.
I have also opened a case with Symantec Support who have also indicated that a new version of the EEB may resolve the issue.
I'm actually very surprised more people haven't run into this yet.
Solved! Go to Solution.
04-17-2015 12:23 AM
QLOGIC HBA need upgraded prior to upgrade , They need to be 5.09.00
you also need to aware of this late breaking news, our upgrade and rollback failed with this exact issue
http://www.symantec.com/business/support/index?page=content&id=TECH229240
04-24-2015 08:39 AM
After working with support, we were able to get the appliance upgraded to 2.6.1.1. Turned out that remnants of ET3592475-2.6.0.3-1 was left behind after installing ET3592475-2.6.0.3-2 ... So if you've got -1 installed of this eeb, be sure you do a proper Rollback first, and ensure its completely removed before installing -2. Once that's installed cleanly, the upgrade should proceed.
04-13-2015 09:41 PM
I've seen SDO (and others) having issues with upgrades to 2.6.1.1 too. In their case from 2.6.0.3. Maybe you should try go to 2.6.0.4 instead, and then to 2.6.1.1.
https://www-secure.symantec.com/connect/forums/choice-upgrade-path-v2603-v2611
In the end the dual upgrade might still be quicker and less troublesome than the one you're attempting now.
04-16-2015 03:37 AM
just come across same issue upgrading a 5220, the upgrade logs indicate an upgrade of firmware is required on a QLOGIC HBA, waiting on instructions on how to do this from symantec
04-17-2015 12:23 AM
QLOGIC HBA need upgraded prior to upgrade , They need to be 5.09.00
you also need to aware of this late breaking news, our upgrade and rollback failed with this exact issue
http://www.symantec.com/business/support/index?page=content&id=TECH229240
04-24-2015 08:39 AM
After working with support, we were able to get the appliance upgraded to 2.6.1.1. Turned out that remnants of ET3592475-2.6.0.3-1 was left behind after installing ET3592475-2.6.0.3-2 ... So if you've got -1 installed of this eeb, be sure you do a proper Rollback first, and ensure its completely removed before installing -2. Once that's installed cleanly, the upgrade should proceed.