10-03-2013 01:23 PM
hi,
in my environment MS-Exchange Server 2010SP2 MS-Windows2008R2 2servers in DAG,
CAS servers 2010SP2 MS-Windows2008R2 2 servers,
Appliance5220 2.5.2
when we restore the backup of individual mailbox on same database location its functional. when we tried to restore the individual mailbox on different database location under the same dag its failed.
10/04/2013 03:09:08 - begin Restore
10/04/2013 03:09:09 - restoring from image dag.com_1379696765
10/04/2013 03:09:09 - Info bprd (pid=21428) Restoring from copy 1 of image created Fri Sep 20 12:06:05 2013
10/04/2013 03:09:09 - requesting resource @aaaac
10/04/2013 03:09:09 - granted resource MediaID=@aaaac;DiskVolume=PureDiskVolume;DiskPool=dp_disk_tnb-appliance;Path=PureDiskVolume;StorageServer=tnb-appliance;MediaServer=tnb-appliance
10/04/2013 03:09:11 - Info bpbrm (pid=21464) MSMPCH1 is the host to restore to
10/04/2013 03:09:11 - Info bpbrm (pid=21464) reading file list from client
10/04/2013 03:09:11 - connecting
10/04/2013 03:09:11 - Info bpbrm (pid=21464) start nbfsd on client
10/04/2013 03:09:13 - Info bpbrm (pid=21464) start nbgre on client
10/04/2013 03:09:15 - Info tar (pid=0) Restore started
10/04/2013 03:09:15 - connected; connect time: 0:00:00
10/04/2013 03:09:47 - Error bpbrm (pid=21464) from client MPCH1: ERR - unable to create object for restore: \\dag\Microsoft Information Store\Database1\Database\Production [ramahmud], rai error = 17
10/04/2013 03:09:47 - Error bpbrm (pid=21464) from client MPCH1: ERR - unable to create object for restore: \\dag\Microsoft Information Store\Database1\Database\ [_mahmud]\Top of Information Store, rai error = 17
4/2013 05:23:24 - Error bpbrm (pid=17731) from client MSMPCH1: ERR - unable to create object for restore: \\dag\Microsoft Information Store\dbx01\Database\bkuptest [bkuptest]\Top of Information Store\Tasks, rai error = 17
10/04/2013 05:23:24 - Info tar (pid=0) done. status 0
10/04/2013 05:23:24 - Info tar (pid=0) done. status: 5
10/04/2013 05:23:24 - Info tar (pid=0) done. status: 5: the restore failed to recover the requested files
10/04/2013 05:23:24 - Error bpbrm (pid=17731) client restore EXIT STATUS 5: the restore failed to recover the requested files
10/04/2013 05:23:24 - restored from image dag.com_1380843563; restore time: 0:00:38
10/04/2013 05:23:25 - end Restore; elapsed time 0:00:45
MS-Exchange policy restore error (2810)
kindly help me for its resolution
regards
10-04-2013 03:11 AM
Have you completed the Distributed Application Mappings on the Master Servers Host Properties?
Have you tried running the restore from the alternate client itself - it should be run from there or the Master only.
The No.Restrictions file is also useful here.
Other than that the bpresolver log file from the CAS / Mailbox servers and the tar log from the destination client would be useful
10-04-2013 08:27 AM
HI Mark all entries present in the master server properties->Distributed Application Mapping along FQN and without FQN .
No.Restriction file is also present 777 permission of altnames/No.Restrictions
but no luck.
10-05-2013 08:51 AM
Is that 2 Exchange database are on different Exchange active node?
Check out with your exchange admin if they are able to move any mailbox between from DB 1 to DB 2 without any error. If they are able to do so then we should check netbackup logs of client for further investigation.
10-10-2013 02:43 AM
... we tried to restore the individual mailbox on different database location ....
Have you created a mailbox on the 'different' database?
One of the basic mailbox restore requirements is that the destination mailbox must exist.
See Prerequisites and operational notes for restoring Exchange individual mailboxes ... in NetBackup for Microsoft Exchange Server Administrator's Guide http://www.symantec.com/docs/DOC5172
10-10-2013 04:32 AM
Not only must it exist on the target location but as mailbixes tie into AD as well as exchange i would imagine that it cannot exist in the original location as well - otherwise the user would have 2 mailboxes on 2 different databases
You need to run this against a test mailbox - run the backup, delete the test mailbox, create an empty new mailbox on the destination and then try the restore - i cannot see how else this could work as exchange would just not allow it
Hope this helps
10-11-2013 02:53 AM
hi Marianne,
yes we created a mailbox on different database using command
CMD ….1:
Get-Mailbox abc |set-mailbox -Database dbx01
Press “Y”
CMD…2:
Set-mailbox abc –applymandatoryproperties
For verification:
Get-mailbox –database dbx01
then we use Netbackup BAR / CAS-server BAR for restoration to different location
it fails
10-11-2013 02:55 AM
Hi Mark,
same location its restoration is working but we want to estore the entire mail box to different location menad from datbase to dbx01
10-24-2013 11:21 PM
hi all,
any solution for MS-exchange backup restore to different location?
is any bug in NB 7.5.0.5 that create a hardle for restoration to different location?
when i tried to restore MS-Exchange backup same location its working fine. i also check to restore FS backup to differnt location it's working.
10-25-2013 02:14 AM