NBU Appliance running 7.6.0.3 how to config SNMP Traps on Solarwinds

[jango]

HI All,

I'm struggling to get SNMP V2c configured on my Solarwinds box for both of my NBU 2.6.0.3.. appliances. I've configured a Community String & added the SNMP server details on both devices, but when I try to add them as nodes, Solarwinds is unable to connect to either..

There's nothing on here or the web I can find that can offer any assistance on whats needed to get this setup...

All I found was there may be a possibility of using the MIB file, but nothing on how?

I also thought about trying to set up Traps using OpsCenter but again, no success with that either...

I'm hoping someone has been through the pain!

Any ideas would be very helpful..

Regards

Jango

[GulzarShaikhAUS]

Hi,

You can configure it from CLISH.

Go to Main > Settings > Alerts >

abc123.Alerts> SNMP Set pqr222.xyz.com public 8080

Where pqr222.xyz.com is your SNMP manager and then the type and then the port number.

once you run the command you should get following message

Successfully set SNMP manager

Then you can run following command to check configured MIB file -

Settings> Alerts > SNMP ShowMIB

an output similar to the following is displayed.

-- ApplianceVersionFile= (#) NBAPP_2.6.0.2


SYMANTEC-APPLIANCE-MONITORING-MIB DEFINITIONS ::= BEGIN

IMPORTS
DisplayString, mib-2 FROM RFC1213-MIB
enterprises, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI;


applianceMonitoringMib MODULE-IDENTITY
LAST-UPDATED "201309240000Z"
ORGANIZATION "Symantec Corporation"
CONTACT-INFO "350 Ellis Street
Mountain View, CA 94043 US
Subject: appliance.mib"
DESCRIPTION "The MIB module for Symantec Appliance Monitoring"

REVISION "201312090000Z"
DESCRIPTION "Removed systemLocation object from list since it was not used or
sent in trap."

::= { products 9 }

symantecsoftware OBJECT IDENTIFIER ::= { enterprises 393 }
products OBJECT IDENTIFIER ::= { symantecsoftware 3 }

systems OBJECT IDENTIFIER ::= { applianceMonitoringMib 1 }
software OBJECT IDENTIFIER ::= { applianceMonitoringMib 2 }

-- system traps

symcsystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System Name"
::= { systems 1 }

symcsystemMessage OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-only
STATUS optional
DESCRIPTION "System information"
::= { systems 2 }

symcfanTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps fan failures"
::= { systems 3 }

symcpowerTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps power failures"
::= { systems 4 }

symcfibrechannelTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps FibreChannel failures"
::= { systems 5 }

symctemperatureTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps temperature failures"
::= { systems 6 }

symccpuTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps cpu failures"
::= { systems 7 }

symcdiskTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps disk failures"
::= { systems 8 }

symcraidgroupTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps raid failures"
::= { systems 9 }


symcenclosurefanTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps enclosure fan failures"
::= { systems 10 }

symcenclosurepowerTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps enclosure power failures"
::= { systems 11 }

symcenclosuretemperatureTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps enclosure temperature failures"
::= { systems 12 }

symcenclosurediskTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps enclosure disk failures"
::= { systems 13 }

symcadapterTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps adapter failures"
::= { systems 14 }

symcfirmwareTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps firmware failures"
::= { systems 15 }

symcpciTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps pci failures"
::= { systems 16 }

symcnetworkcardTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps network card failures"
::= { systems 17 }

symcvolumeTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps volume failures"
::= { systems 18 }

symcbbuTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps BBU failures"
::= { systems 19 }

symcconnectionTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Traps connection failures"
::= { systems 20 }

symcpartitionTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Partition alert traps"
::= { systems 21 }

-- software traps

symcfailedJobsTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Job failures Trap"
::= { software 1 }

symcprocessTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Processes stopped traps"
::= { software 2 }

symcdiskSpaceTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Low disk space traps"
::= { software 3 }

symcsoftwareUpdateSuccessTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Software update success trap"
::= { software 4 }

symcsoftwareUpdateFailedRollbackSuccessTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Software update failed but rollback was successful trap"
::= { software 5 }

symcsoftwareUpdateFailedRollbackFailedTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Software update and rollback failed trap"
::= { software 6 }

symcrollbackSuccessTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Software rollback success trap"
::= { software 7 }

symcrollbackFailedTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Software rollback failed trap"
::= { software 8 }

symcclusterStateTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Cluster node failed trap"
::= { software 9 }

symcdiskPerfTrap NOTIFICATION-TYPE
OBJECTS { symcsystemName, symcsystemMessage }
STATUS current
DESCRIPTION "Disk performance alert trap"
::= { software 10 }

END