09-08-2020 02:05 AM
Which Cables/Transceivers is compatible with NBU 5250 for connecting with 10GbE Ethernet switch.
09-08-2020 07:23 AM
Are you asking about DAC cables? The 10GbE cards come with transceivers for optical cabling.
Any TwinAx/DAC cable rated for 10GbE will work - note that it will NOT work to get to 25GbE, which those cards are capable of supporting. It requires a 25GbE DAC to achieve that.
This page lists specification-compliant DAC cables that will work, though there is no official HCL for cables.
https://www.veritas.com/support/en_US/article.100008152
09-09-2020 01:35 AM
The switch end the port is 10-Base T Module.
So how can we connect NBU 5250 10/25GBE port in to the switch.
09-09-2020 01:41 AM
Is there any module available like FCLF8522P2BTL to connect RJ 45 CAD 6 (10GbE Speed)Connector in applicance end,then we can use CAD6 cable to connect to switch.
09-09-2020 07:05 AM
I am checking that those will work in the NICs the 5250 uses. I'm pretty sure they will, but I haven't personally tested it. That would only provide you 1GbE, however, not 10GbE, just to be clear.