03-14-2017 07:10 AM
Version 2.6.0.3
I would like to perform an upgrade to 2.7.3 or 3.0
Kindly let me know the procedure and where to download the software.
I never worked on appliance before. Please help to find the right documents if any.
Master version is at 7.6.0.3, I'm planning to upgrade this to 8.0.
Solved! Go to Solution.
03-14-2017 08:10 AM
First off, you can't go directly to 2.7.3 or 3.0 from 2.6.0.3, you'll need to go to 2.6.1 first. From there you can go straight to 3.0.
You must upgrade the master first to 8.0, in case you didn't know that.
Documentation-wise, start with the Appliance Upgrade guide. There is an upgrade guide for both 2.7.3 and 3.0. If you want ultimately to go to 3.0/8.0, my advice is to go to it and only stop off on the versions you need to, like getting 2.6.0.3 to 2.6.1.
Appliance docs are here
https://www.veritas.com/support/en_US/article.DOC2792
03-20-2017 08:54 AM
Yes, those are the files you want to download BUT as I said in one of the earlier posts, you can't go to 2.7.x or 3.0 straight from where you're at.
You have to go from 2.6.0.3 to 2.6.1.2. Then you can go to 2.7.x or 3.0 depending on which you want to do.
You can download the 2.6.1.2 upgrade files from
https://www.veritas.com/support/en_US/article.000024747
So download the 2.6.1.2a files, upgrade, and then you can go to 2.7.3 or 3.0 whichever you wish.
03-14-2017 08:10 AM
First off, you can't go directly to 2.7.3 or 3.0 from 2.6.0.3, you'll need to go to 2.6.1 first. From there you can go straight to 3.0.
You must upgrade the master first to 8.0, in case you didn't know that.
Documentation-wise, start with the Appliance Upgrade guide. There is an upgrade guide for both 2.7.3 and 3.0. If you want ultimately to go to 3.0/8.0, my advice is to go to it and only stop off on the versions you need to, like getting 2.6.0.3 to 2.6.1.
Appliance docs are here
https://www.veritas.com/support/en_US/article.DOC2792
03-15-2017 07:11 AM
Thanks for the reply.
I will first upgrade to 2.6.1.2 and then to 3.0. I was not aware that I will have to do a 2 step upgrade.
Thanks alot for the information.
Also still I'm unable to download the software onto my appliance.
http://www.symantec.com/business/support/index?page=landing&key=58991
I couldnt find any link where i can download the software /package for 2.6.1.2 and 3.0
03-15-2017 07:30 AM
Hi,
please read this for upgrading to 2.6.1
https://www.veritas.com/support/en_US/article.000024747
A list of appliances updates
https://www.veritas.com/support/en_US/article.000011514
ciao
tunix2k
03-15-2017 09:43 AM
Hi ,
Thanks a lot for the informations.
I read through this : NetBackup Appliance 2.6.1.2a Release
https://www.veritas.com/support/en_US/article.000024747
I didnt understand about the client packages and its usage.
We have 2 Netbackup 5220 Appliance in our environment currently running with 2.6.0.3 , so please confirm if I should ONLY download these 3 files.
NB_Appliance_N_2.6.1.2-2.x86_64-tar-split.1of3
NB_Appliance_N_2.6.1.2-2.x86_64-tar-split.2of3
NB_Appliance_N_2.6.1.2-2.x86_64-tar-split.3of3
I'm a newbie to this kindly help :(
03-15-2017 10:45 AM
If you don't run the client installs off the appliance or use it as a repository of sorts for the client packages, then just download those three files and combine them back into one, and that will be the file you use to install the update.
If you DO want the client packages on the appliance, you'll need to download the add-ons as well, and then install them via the CLISH, which is documented in the appliance admin guide.
03-17-2017 01:58 AM
I didnt understand the use of those client packages , so I'm confused
03-20-2017 02:19 AM
It is possible to install additional client packages in the appliance, but you don't need to do it.
Even.
03-20-2017 03:55 AM - edited 03-20-2017 03:59 AM
Hi Even,
Thanks for the confirmation.
I'm confused again, I got 2.6.1.2 (x3 files ) from Veritas site , but I see this version is 2.6.0.3.
What should be ideal?
My ultimate aim is to upgrade to the latest version.
03-20-2017 06:34 AM
I would suggest using the CLISH rather than the GUI. If you downloaded the files separately, they're not going to show up there.
Take a look at the Admin Guide or the Upgrade Guide for instructions on how to move the files to the appliance and then apply them. Make sure you account for downtime since all jobs are stopped during the upgrade.
03-20-2017 06:45 AM
You don't download software from Symantec.
You download from https://my.veritas.com
Logon as the user who the software is licensed to, then click on Licensing -> Entitlements
03-20-2017 08:46 AM
Thanks alot for the response : @vtas_chas @Even @tunix2k @Marianne :)
I was not able to download the files from MyVeritas. Cause in that it listed only the files for Netbackup Server ( Master server), Opscenter server, agents.
But I could find the files in Veritas Site :
NetBackup Appliance 2.7.3 Release
NetBackup Appliance Release 3.0
In these when I click on the Download Attachment I could find many packages or tar files attached to those veritas articles.
So I can go proceed by using the files in these article, transferring them to the appliance and following the instructions in the above articles. Please confirm.
TIA :)
03-20-2017 08:54 AM
Yes, those are the files you want to download BUT as I said in one of the earlier posts, you can't go to 2.7.x or 3.0 straight from where you're at.
You have to go from 2.6.0.3 to 2.6.1.2. Then you can go to 2.7.x or 3.0 depending on which you want to do.
You can download the 2.6.1.2 upgrade files from
https://www.veritas.com/support/en_US/article.000024747
So download the 2.6.1.2a files, upgrade, and then you can go to 2.7.3 or 3.0 whichever you wish.
03-20-2017 09:33 AM
Yes sure, I will first upgrade to the intermediate level and then to the latest :)
Thank you @vtas_chas