cancel
Showing results for 
Search instead for 
Did you mean: 

Random failure with status code 23

rblaas
Level 3

Hi all,

Could someone point me in the right direction? 

I have this problem which randomly occurs . 

I am backing up a physical client (mac OS X 10.6.8) and this client has 2 volumes. 

Most of the times the backup runs successfully. but now and then the backup fails with status 23. 

I can connect to the client via telnet on port 13782

DNS resolving works to. 

Here is some logging:

01/27/2015 11:10:14 - Info nbjm (pid=26156) starting backup job (jobid=4178) for client delage.xxxx.nl, policy PHYSICAL_LINUX_SPECIAL, schedule Daily_Dinc
01/27/2015 11:10:15 - Info bpbrm (pid=183283) delage.xxxx.nl is the host to backup data from
01/27/2015 11:10:15 - Info bpbrm (pid=183283) reading file list for client
01/27/2015 11:10:15 - estimated 1915622 kbytes needed
01/27/2015 11:10:15 - Info nbjm (pid=26156) started backup (backupid=delage.xxxx.nl_1422353415) job for client delage.xxxx.nl, policy PHYSICAL_LINUX_SPECIAL, schedule Daily_Dinc on storage unit STU_MSDP_NETBACKUP
01/27/2015 11:10:15 - started process bpbrm (pid=183283)
01/27/2015 11:10:16 - Info bpbrm (pid=183283) accelerator enabled
01/27/2015 11:10:16 - Error bpbrm (pid=183283) bpcd on delage.xxxx.nl exited with status 23: socket read failed
01/27/2015 11:10:16 - Info bpbkar (pid=0) done. status: 23: socket read failed
01/27/2015 11:10:16 - end writing
socket read failed  (23)

 

Client and Appliance running NetBackup v7.6.1

 

11 REPLIES 11

SymTerry
Level 6
Employee Accredited

DNS may be working wone way but coming back another. Please follow the solution in TECH54563
 to check long name, short name and reverse DNS via the bpclntcmd command.

RiaanBadenhorst
Moderator
Moderator
Partner    VIP    Accredited Certified

I would check bpbkar log on the client, it is dying too quickly to be a timeout.

rblaas
Level 3

@SymTerry: Why should I check the shortname? Everything is setup with FQDN. 

 

I have run the command using FQDN and it works fine. 

 

Also good to know that since yesterday 14.00 the job ran without problems (did not change a thing) Now I have to wait untill it fails again.... 

(this policy runs every hour)

 

 

rblaas
Level 3

Spoke to soon.. the 9.00 run failed for one partition... (how is that possible anyway...) 

Other partition runs fine..

 

RiaanBadenhorst
Moderator
Moderator
Partner    VIP    Accredited Certified

If you're running multiple datastreams it kicks of independent process (bpbkar) for each partition. So one can fail and the rest can survive.

rblaas
Level 3

@Riaan: where can I find the bpbkar log file? 

I have looked in /usr/open/netbackup/logs/  and /var/log/ 

Or maybe I should turn on this logging first ?

EDIT: Nevermind.. I found the option.. I have now created the directory, so the next time it fails I should have some more detailed logging

RiaanBadenhorst
Moderator
Moderator
Partner    VIP    Accredited Certified

Cool :)

 

Is there maybe AV software on that MAC? Something that can be killing / stopping the backup processes?

rblaas
Level 3

@Riaan: No there is no AV on the mac. Will have to wait untill the next failure for more troubleshooting.. 

The job/partition which failed at 9.00 has restarted (as it should) and ran fine. Job at 10.00 ran fine too... 

 

 

rblaas
Level 3

Ok,

 

This is annoying...

Backup has failed. Doesn't even do a retry.. 

Have NO log on client! 

What now ?

 

 

rblaas
Level 3

I found some logging on the NetBackup Appliance (bpbrm)

16:10:33.854 [66498] <2> logparams: -backup -S netbackup -c xxxx.tros.nl -ct 0 -ru root -cl PHYSICAL_LINUX_SPECIAL -sched Daily_Dinc -bt 1422457833 -dt 3902 -st 1 -b xxxx.tros.nl_1422457833 -mediasvr netbackup -jobid 4581 -jobgrpid 4580 -masterversion 760000 -maxfrag 51200 -bpstart_time 1422458133 -reqid -1421688207 -mt 0 -to 0 -stunit STU_MSDP_NETBACKUP -rl 1 -rp 1209600 -eari 0 -p PureDiskVolume -mst 6 -flags 2 -storagesvr netbackup -sts_type PureDisk -use_ofb -use_otm -jm -secure 1 -kl 13 -rg root -fso -fscp -stream_count 2 -stream_number 2 -connect_options 16974338 
16:10:33.854 [66498] <4> bpbrm main: ensured stderr cannot be used
16:10:33.855 [66498] <2> bpbrm main: max_entries_per_add = 5000
16:10:33.856 [66498] <2> read_client: dname=., offline=0, online_at=0 offline_at=0
16:10:33.856 [66498] <2> read_client: dname=.., offline=0, online_at=0 offline_at=0
16:10:33.856 [66498] <2> read_client: dname=CO_0, offline=0, online_at=0 offline_at=0
16:10:33.856 [66498] <2> read_client: dname=OA_0, offline=0, online_at=0 offline_at=0
16:10:33.856 [66498] <2> read_client: dname=host_info, offline=0, online_at=0 offline_at=0
16:10:33.856 [66498] <2> read_host_info: CONNECT_NON_RES_PORT 2
16:10:33.856 [66498] <2> read_host_info: DYNAMIC_ADDRESS 0
16:10:33.856 [66498] <2> read_host_info: FREE_BROWSE 0
16:10:33.856 [66498] <2> read_host_info: LIST_RESTORE 0
16:10:33.856 [66498] <2> read_host_info: MAX_JOBS_THIS_CLIENT 3
16:10:33.856 [66498] <2> read_host_info: NO_CALLBACK 2
16:10:33.856 [66498] <2> read_host_info: WOFB_ENABLED 1
16:10:33.856 [66498] <2> read_host_info: WOFB_FIM 1
16:10:33.856 [66498] <2> read_host_info: WOFB_USAGE 0
16:10:33.856 [66498] <2> read_host_info: WOFB_ERROR 0
16:10:33.856 [66498] <2> read_host_info: DAEMON_PORT_TYPE 3
16:10:33.856 [66498] <2> read_host_info: OST_CLIENT_DIRECT 0
16:10:33.856 [66498] <2> read_host_info: OST_PROXY 0
16:10:33.856 [66498] <2> read_host_info: OST_PROXY_SERVER *NULL*
16:10:33.856 [66498] <2> read_host_info: OST_CLIENT_DIRECT_RESTORE 0
16:10:33.856 [66498] <2> db_freeEXDB_INFO: ?
16:10:33.868 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.869 [66498] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.40234 TO xx.xx.yy.8.1556 fd = 4
16:10:33.873 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.874 [66498] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.39411 TO xx.xx.yy.8.1556 fd = 5
16:10:33.874 [66498] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
16:10:33.875 [66498] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:457] ipc_string /usr/openv/var/tmp/vnet-66559422457833871812000000341-5ihqJV
16:10:33.957 [66498] <2> bpcr_get_version_rqst: bpcd version: 07610000
16:10:33.958 [66498] <2> bpbrm start_bpcd_stat: DATA_SOCK from bpcr = 4
16:10:33.958 [66498] <2> bpbrm start_bpcd_stat: NAME_SOCK from bpcr = 5
16:10:33.958 [66498] <2> bpcr_get_version_rqst: bpcd version: 07610000
16:10:33.964 [66498] <2> read_legacy_touch_file: Found /usr/openv/netbackup/db/config/SIZE_DATA_BUFFERS_DISK; requested from (miscsvr.c.521).
16:10:33.964 [66498] <2> read_legacy_touch_file: 2097152 read ; requested from (miscsvr.c.521).
16:10:33.965 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.965 [66498] <2> job_connect: SO_KEEPALIVE set on socket 4 for client netbackup
16:10:33.965 [66498] <2> logconnections: BPJOBD CONNECT FROM xx.xx.xx.150.58981 TO xx.xx.xx.150.1556 fd = 4
16:10:33.965 [66498] <2> job_authenticate_connection: ignoring VxSS authentication check for now...
16:10:33.966 [66498] <2> job_connect: Connected to the host netbackup contype 53 jobid <4581> socket <4>
16:10:33.966 [66498] <2> job_connect: Connected on port 58981
16:10:33.966 [66498] <2> bpbrm main: send_3_0_client_params = 1
16:10:33.969 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.969 [66498] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.44266 TO xx.xx.yy.8.1556 fd = 5
16:10:33.971 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.971 [66498] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.54381 TO xx.xx.yy.8.1556 fd = 6
16:10:33.972 [66498] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
16:10:33.972 [66498] <8> vnet_pop_byte: [vnet.c:194] errno 0 0x0
16:10:33.972 [66498] <2> vnet_pop_byte: vnet.c.196: 0: Function failed: 9 0x00000009
16:10:33.972 [66498] <2> vnet_pop_string: vnet.c.276: 0: Function failed: 9 0x00000009
16:10:33.972 [66498] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:454] status 9 0x9
16:10:33.972 [66498] <2> bpcr_vnetd_connect_forward_socket_begin: vnet_vnetd_connect_forward_socket_begin() failed: 9
16:10:33.972 [66498] <2> local_bpcr_connect: bpcr_vnetd_connect_forward_socket_begin failed: 23
16:10:33.972 [66498] <2> ConnectToBPCD: bpcd_connect_and_verify(xxxx.tros.nl, xxxx.tros.nl) failed: 23
16:10:33.972 [66498] <16> bpbrm start_bpcd_stat: bpcd on xxxx.tros.nl exited with status 23: socket read failed
16:10:33.972 [66498] <4> db_error_add_to_file: bpcd on xxxx.tros.nl exited with status 23: socket read failed
16:10:33.972 [66498] <2> bpbrm start_bpcd: ../bpbrm.c.23102: start_bpcd_stat failed: 23 23 0x00000017

16:10:33.973 [66498] <2> bpbrm kill_child_process: start
16:10:33.973 [66498] <2> bpbrm Exit: attempting to send mail to root on xxxx.tros.nl
16:10:33.974 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.975 [66498] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.55643 TO xx.xx.yy.8.1556 fd = 5
16:10:33.976 [66498] <2> vnet_pbxConnect: pbxConnectEx Succeeded
16:10:33.977 [66498] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.33774 TO xx.xx.yy.8.1556 fd = 6
16:10:33.977 [66498] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
16:10:33.978 [66498] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:457] ipc_string /usr/openv/var/tmp/vnet-66563422457833974589000000341-5ihqJV
16:10:34.062 [66498] <2> bpcr_get_version_rqst: bpcd version: 07610000
16:10:34.062 [66498] <2> bpbrm Exit: OUT_SOCK from bpcr = 5
16:10:34.062 [66498] <2> bpbrm Exit: IN_SOCK from bpcr = 6
16:10:34.062 [66498] <2> bpcr_get_version_rqst: bpcd version: 07610000
16:10:34.063 [66498] <2> bpcr_get_version_rqst: bpcd version: 07610000
16:10:34.092 [66498] <2> bpcr_get_version_rqst: bpcd version: 07610000
16:10:34.107 [66498] <2> bpbrm Exit: client backup EXIT STATUS 23: socket read failed
16:10:34.111 [66498] <2> job_monitoring_exex: ACK disconnect
16:10:34.111 [66498] <2> job_disconnect: Disconnected

 

What is going on here (Bold text)?

 

 

 

rblaas
Level 3

And again a failure.. (only on 1 partition.) 

this output looks different then the last one.. 

 

17:24:24.982 [82524] <2> bpbrm main: INITIATING (VERBOSE = 1): version NetBackup 7.6.1 2014102721
17:24:24.982 [82524] <2> logparams: -backup -S netbackup -c delage.tros.nl -ct 0 -ru root -cl PHYSICAL_LINUX_SPECIAL -sched Daily_Dinc -bt 1422462264 -dt 3902 -st 1 -b delage.tros.nl_1422462264 -mediasvr netbackup -jobid 4585 -jobgrpid 4584 -masterversion 760000 -maxfrag 51200 -bpstart_time 1422462564 -reqid -1421688216 -mt 0 -to 0 -stunit STU_MSDP_NETBACKUP -rl 1 -rp 1209600 -eari 0 -p PureDiskVolume -mst 6 -flags 2 -storagesvr netbackup -sts_type PureDisk -use_ofb -use_otm -jm -secure 1 -kl 13 -rg root -fso -fscp -stream_count 2 -stream_number 1 -connect_options 16974338 
17:24:24.982 [82524] <4> bpbrm main: ensured stderr cannot be used
17:24:24.983 [82524] <2> bpbrm main: max_entries_per_add = 5000
17:24:24.983 [82524] <2> read_client: dname=., offline=0, online_at=0 offline_at=0
17:24:24.983 [82524] <2> read_client: dname=.., offline=0, online_at=0 offline_at=0
17:24:24.983 [82524] <2> read_client: dname=CO_0, offline=0, online_at=0 offline_at=0
17:24:24.983 [82524] <2> read_client: dname=OA_0, offline=0, online_at=0 offline_at=0
17:24:24.983 [82524] <2> read_client: dname=host_info, offline=0, online_at=0 offline_at=0
17:24:24.984 [82524] <2> read_host_info: CONNECT_NON_RES_PORT 2
17:24:24.984 [82524] <2> read_host_info: DYNAMIC_ADDRESS 0
17:24:24.984 [82524] <2> read_host_info: FREE_BROWSE 0
17:24:24.984 [82524] <2> read_host_info: LIST_RESTORE 0
17:24:24.984 [82524] <2> read_host_info: MAX_JOBS_THIS_CLIENT 3
17:24:24.984 [82524] <2> read_host_info: NO_CALLBACK 2
17:24:24.984 [82524] <2> read_host_info: WOFB_ENABLED 1
17:24:24.984 [82524] <2> read_host_info: WOFB_FIM 1
17:24:24.984 [82524] <2> read_host_info: WOFB_USAGE 0
17:24:24.984 [82524] <2> read_host_info: WOFB_ERROR 0
17:24:24.984 [82524] <2> read_host_info: DAEMON_PORT_TYPE 3
17:24:24.984 [82524] <2> read_host_info: OST_CLIENT_DIRECT 0
17:24:24.984 [82524] <2> read_host_info: OST_PROXY 0
17:24:24.984 [82524] <2> read_host_info: OST_PROXY_SERVER *NULL*
17:24:24.984 [82524] <2> read_host_info: OST_CLIENT_DIRECT_RESTORE 0
17:24:24.984 [82524] <2> db_freeEXDB_INFO: ?
17:24:24.995 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:24.996 [82524] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.44026 TO xx.xx.yy.8.1556 fd = 4
17:24:25.000 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.000 [82524] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.37435 TO xx.xx.yy.8.1556 fd = 5
17:24:25.001 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
17:24:25.002 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:457] ipc_string /usr/openv/var/tmp/vnet-67842422462264999092000000344-Ps84Os
17:24:25.082 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.082 [82524] <2> bpbrm start_bpcd_stat: DATA_SOCK from bpcr = 4
17:24:25.082 [82524] <2> bpbrm start_bpcd_stat: NAME_SOCK from bpcr = 5
17:24:25.083 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.088 [82524] <2> read_legacy_touch_file: Found /usr/openv/netbackup/db/config/SIZE_DATA_BUFFERS_DISK; requested from (miscsvr.c.521).
17:24:25.089 [82524] <2> read_legacy_touch_file: 2097152 read ; requested from (miscsvr.c.521).
17:24:25.090 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.090 [82524] <2> job_connect: SO_KEEPALIVE set on socket 4 for client netbackup
17:24:25.090 [82524] <2> logconnections: BPJOBD CONNECT FROM xx.xx.xx.150.38599 TO xx.xx.xx.150.1556 fd = 4
17:24:25.090 [82524] <2> job_authenticate_connection: ignoring VxSS authentication check for now...
17:24:25.090 [82524] <2> job_connect: Connected to the host netbackup contype 53 jobid <4585> socket <4>
17:24:25.090 [82524] <2> job_connect: Connected on port 38599
17:24:25.091 [82524] <2> bpbrm main: send_3_0_client_params = 1
17:24:25.094 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.094 [82524] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.45849 TO xx.xx.yy.8.1556 fd = 5
17:24:25.096 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.097 [82524] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.49235 TO xx.xx.yy.8.1556 fd = 6
17:24:25.097 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
17:24:25.098 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:457] ipc_string /usr/openv/var/tmp/vnet-67844422462265095182000000344-Ps84Os
17:24:25.178 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.178 [82524] <2> bpbrm start_bpcd_stat: DATA_SOCK from bpcr = 5
17:24:25.178 [82524] <2> bpbrm start_bpcd_stat: NAME_SOCK from bpcr = 6
17:24:25.180 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.181 [82524] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.50973 TO xx.xx.yy.8.1556 fd = 8
17:24:25.183 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.183 [82524] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.33569 TO xx.xx.yy.8.1556 fd = 9
17:24:25.184 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
17:24:25.184 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:457] ipc_string /usr/openv/var/tmp/vnet-67846422462265181475000000344-Ps84Os
17:24:25.262 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.262 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.269 [82524] <2> Orb::init: Enabling ORBNativeCharCodeSet UTF-8(Orb.cpp:713)
17:24:25.271 [82524] <2> Orb::init: initializing ORB Default_CLIENT_Orb with: Unknown -ORBSvcConfDirective "-ORBDottedDecimalAddresses 0" -ORBSvcConfDirective "static Resource_Factory '-ORBNativeCharCodeSet UTF-8'" -ORBSvcConfDirective "static PBXIOP_Factory '-enable_keepalive'" -ORBSvcConfDirective "static EndpointSelectorFactory ''" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory PBXIOP_Factory'" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory IIOP_Factory'" -ORBDefaultInitRef '' -ORBSvcConfDirective "static PBXIOP_Evaluator_Factory '-orb Default_CLIENT_Orb'" -ORBSvcConfDirective "static Resource_Factory '-ORBConnectionCacheMax 1024 '" -ORBSvcConf /dev/null -ORBSvcConfDirective "static Server_Strategy_Factory '-ORBMaxRecvGIOPPayloadSize 268435456'"(Orb.cpp:916)
17:24:25.276 [82524] <2> Orb::init: caching EndpointSelectorFactory(Orb.cpp:930)
17:24:25.317 [82524] <4> MmDeviceMappings::GetRobotAttributes
    : <../../lib/MmDeviceMappings.cpp:976> search robot list (length=424) for OST PureDisk, type 8

17:24:25.317 [82524] <4> MmDeviceMappings::GetRobotAttributes
    : <../../lib/MmDeviceMappings.cpp:1229> found match: "PureDisk" OST PureDisk
17:24:25.317 [82524] <2> nb_accl_sts_support_check: accelerator support code is 1
17:24:25.317 [82524] <2> nb_accl_validate: accelerator enabled
17:24:25.317 [82524] <4> nb_accl_get_last_backup_byname: track_dir_win=\netbackup\netbackup\delage.tros.nl\PHYSICAL_LINUX_SPECIAL, track_dir_lnx=/netbackup/netbackup/delage.tros.nl/PHYSICAL_LINUX_SPECIAL, IN_SOCK=-1, OUT_SOCK=-1,real_client delage.tros.nl,client_param delage.tros.nl,client_hostname_param delage.tros.nl .
17:24:25.319 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.319 [82524] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.36196 TO xx.xx.yy.8.1556 fd = 11
17:24:25.321 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.322 [82524] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.41632 TO xx.xx.yy.8.1556 fd = 12
17:24:25.322 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
17:24:25.322 [82524] <8> vnet_pop_byte: [vnet.c:194] errno 0 0x0
17:24:25.322 [82524] <2> vnet_pop_byte: vnet.c.196: 0: Function failed: 9 0x00000009
17:24:25.322 [82524] <2> vnet_pop_string: vnet.c.276: 0: Function failed: 9 0x00000009
17:24:25.322 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:454] status 9 0x9
17:24:25.322 [82524] <2> bpcr_vnetd_connect_forward_socket_begin: vnet_vnetd_connect_forward_socket_begin() failed: 9
17:24:25.322 [82524] <2> local_bpcr_connect: bpcr_vnetd_connect_forward_socket_begin failed: 23
17:24:25.322 [82524] <2> ConnectToBPCD: bpcd_connect_and_verify(delage.tros.nl, delage.tros.nl) failed: 23
17:24:25.323 [82524] <16> bpbrm start_bpcd_stat: bpcd on delage.tros.nl exited with status 23: socket read failed
17:24:25.323 [82524] <4> db_error_add_to_file: bpcd on delage.tros.nl exited with status 23: socket read failed
17:24:25.323 [82524] <2> bpbrm start_bpcd: ../bpbrm.c.23102: start_bpcd_stat failed: 23 23 0x00000017
17:24:25.323 [82524] <2> bpbrm kill_child_process: start
17:24:25.323 [82524] <2> bpbrm Exit: attempting to send mail to root on delage.tros.nl
17:24:25.325 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.325 [82524] <2> logconnections: BPCD CONNECT FROM xx.xx.xx.150.44802 TO xx.xx.yy.8.1556 fd = 11
17:24:25.328 [82524] <2> vnet_pbxConnect: pbxConnectEx Succeeded
17:24:25.328 [82524] <8> do_pbx_service: [vnet_connect.c:2156] via PBX VNETD CONNECT FROM xx.xx.xx.150.49476 TO xx.xx.yy.8.1556 fd = 12
17:24:25.328 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:440] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
17:24:25.329 [82524] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:457] ipc_string /usr/openv/var/tmp/vnet-67850422462265326415000000344-Ps84Os
17:24:25.410 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.410 [82524] <2> bpbrm Exit: OUT_SOCK from bpcr = 11
17:24:25.410 [82524] <2> bpbrm Exit: IN_SOCK from bpcr = 12
17:24:25.410 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.411 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.437 [82524] <2> bpcr_get_version_rqst: bpcd version: 07610000
17:24:25.451 [82524] <2> bpbrm Exit: client backup EXIT STATUS 23: socket read failed
17:24:25.456 [82524] <2> job_monitoring_exex: ACK disconnect
17:24:25.456 [82524] <2> job_disconnect: Disconnected