Showing results for 
Search instead for 
Did you mean: 

Still receiving email alerts for fixed issues

Level 0

Hi all

Every day I get an Alert Summary email as below showing my Unresolved Alerts.  However this issue has long since been fixed, the log filesystem on the NetBackup virtual appliance is only 27% full (see below), but I keep getting this email anyway.  How can I mark this as resolved so I stop getting the email?  Virtual appliance version is  Thanks in advance.


  • The partition usage has exceeded warning threshold and will soon reach full capacity. Cleanup the partition and re-check status. If the issue is not resolved, contact Veritas Technical Support for assistance.
    • Time of event: 2023-10-10 14:49:26 (+13:00)
    • UMI Event code: V-475-103-1001
    • Component Type: Partition
    • Component: Log
    • Status: 88%
    • State: WARNING
    • Additional information about this error is available at following link:


Filesystem Size Used Avail Use% Mounted on
devtmpfs 63G 0 63G 0% /dev
tmpfs 63G 76K 63G 1% /dev/shm
tmpfs 63G 4.1G 59G 7% /run
tmpfs 63G 0 63G 0% /sys/fs/cgroup
/dev/mapper/system-root 49G 17G 30G 36% /
tmpfs 63G 764K 63G 1% /tmp
/dev/sda1 477M 56M 392M 13% /boot
/dev/mapper/system-home 4.8G 122M 4.5G 3% /home
/dev/mapper/system-var 9.8G 6.2G 3.1G 67% /var
/dev/mapper/system-rep 4.9G 33M 4.6G 1% /repository
/dev/mapper/system-log 98G 25G 68G 27% /log
/dev/mapper/system-inst 49G 2.8G 44G 6% /inst
/dev/mapper/system-audit 4.8G 2.9G 1.7G 64% /var/log/audit