06-02-2015 11:35 PM
Hi
we are planning to upgrade our NBU appliance 5220 to version 2.6.0.4 from 2.6.0.3.
It is being used as media server and some tape drives are also attached to it.
I have download the patch of 2.6.0.4 on my applaince. It total capacity is 40 TB and used is approx 17 TB.
Please let me know how should I proceed, what are the pre-requisites.
how long this upgrade will take.
Solved! Go to Solution.
06-04-2015 07:48 AM
Personally I would strongly recommend upgrading to a 2.6.1.x release unless there is some environmental reason not to. 2.6.1.2 just went GA this week. While there were some minor fixes in the 2.6.0.4 release, I believe you'll find more benefit in upgrading to the latest version.
It should also be noted that the upgrade path from 2.6.0.x to 2.6.1.x is as follows:
2.6.0.3 --> 2.6.1+
2.6.0.4 --> 2.6.1.1+
As far as the time for the upgrade, it can really depend. Being that you're already on a 2.6.x.x version it should go more quickly, but I would still allow at least an hour.
You can check the IPMI configuration from within the CLISH under "Support" >> "IPMI"
Hope this helps!
-Chad
06-02-2015 11:47 PM
also how to check IPMI of appliance ?
06-04-2015 07:48 AM
Personally I would strongly recommend upgrading to a 2.6.1.x release unless there is some environmental reason not to. 2.6.1.2 just went GA this week. While there were some minor fixes in the 2.6.0.4 release, I believe you'll find more benefit in upgrading to the latest version.
It should also be noted that the upgrade path from 2.6.0.x to 2.6.1.x is as follows:
2.6.0.3 --> 2.6.1+
2.6.0.4 --> 2.6.1.1+
As far as the time for the upgrade, it can really depend. Being that you're already on a 2.6.x.x version it should go more quickly, but I would still allow at least an hour.
You can check the IPMI configuration from within the CLISH under "Support" >> "IPMI"
Hope this helps!
-Chad
06-18-2015 11:25 PM
Thanks Chad,
Regarding upgrade to 2.6.1.x , is it a major upgrade ?
do we need to check with symantec for its license or can directly download its patch and install. ?
06-20-2015 04:34 AM
Several things in this post are worth knowing before you attempt an upgrade:
https://www-secure.symantec.com/connect/forums/5230-appliance-bios-warning
You should be able to download the latest rpms kits using teh appliance itself. Or downlaod the rpm kits via the normal relase tech note pages. You only need the serial number if you want to download the bootable ISO files (for appliance re-imaging).
Your existing v2.6.0.x license key will work with v2.6.1(.x) appliances.
06-22-2015 12:07 PM
In Symantec terminology a "major" upgrade is a change in the "first dot"........so 6.5, 7.0, 7.1, 7.5, 7.6 and 7.7 would be the MAJOR release numberings. The "second dot" or "double dot" release is the "minor" release version and the "third dot" or "triple dot" is the maintenance release level in the current numbering scheme.
With that background in mind, while technically 2.6.0.x to 2.6.1.x is only a minor upgrade, there were some significant changes that should not be overlooked and can be found in the release notes (https://support.symantec.com/en_US/article.TECH215210.html).
Additionally, a great link to save is the consolidated patch listing for the appliances located here: https://support.symantec.com/en_US/article.TECH150251.html
06-23-2015 05:41 AM
Is there any way to check if upgrade is in progress..??
It is been alsmots 3 hours , I have triggered the Install cmmand from jviewer. but still
.Software> UpgradeStatus
The appliance version is 2.6.0.3 and not in upgrade statie.
but in ps -ef output I can see, Install SYMC_NBAPP_.....rpm command.
hwo to ensure this upgrade is still in progress or has failed.
06-25-2015 07:03 AM
Hi All
Thanks to all of you for your support, Upgradation has completed successfully.
I had to uninstall EEB "SYMC_NBAPP_EEB_ET3592475-2.6.0.3-1.x86_64.rpm" , causing the issue.
then upgrade went smooth. But now after upgradation, appliance is not able to communicate with some of clients. We are able to ping applaince from clients, but vice versa is not possible.
I assume there could be some non-persistent routes, which are now lost after reboot during upgrade..
Is there any way to assure this doubt ?
Please suggest any other factors which can cause this.
07-15-2015 02:51 AM
This has been resolved, Got all the routes from networking team.
initially I was unable to add the routes, then I Had to delete the bond and default gateway.
Then I recreated bond and added gateway and routes.
Finally It has worked, thanks all for your help.