04-21-2011 03:34 AM
Hi Guys,
Just a quick note on how to upgrade NBU 5200 from the ISO image located on the HDD of your workstation. Please note that this procedure can be only used for the brand new, unconfigured 5200. The procedure reimages the box :)
1. Connect to IPMI
2. Run KVM
3. Mount the iso image from within the KVM
4. Reboot the server using typing reboot
5. On the power up, in the BIOS section, kit DEL
6. Enter the BIOS Setup
7. Select the boot order from the Other Device
8. Save the BIOS config
9. Boot the server
10. In the GRUB section, select Install
11. Install the NBU5200
Note that IPMI settings (especially Network Settings) are not reset to the default when the system is being upgraded.
04-22-2011 07:57 AM
Nice work.