Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

Resolved! NetBackup 5020 Appliance Data Erasure

I am looking for a procedure to perform a data erasure on a 5020 appliance.  We need to send several appliances back to Symantec.  Is there an official Symantec procedure for performing a data erasure?

Resolved! Audit - Who changed what policies and when

We are running NBU Appliance based environment ver and NBU ver. We are required to enable auditing to capture who changed what policies and when. We also have OpsCenter Analytics that I am sure can possible be useful. Appreciate yo...

Itegral by Level 6
  • 4 replies
  • 0 kudos

Resolved! P2V Coversion fails with Status 7

Greetings, I  got involved with one P2V conversion issue which is segementation fault (core dumping) when executing through GUI and nbrestorevm command fails with P2V conversion job status 7. We have Appliances Based Master/Media Server running 2.6...

VPATIL by Level 3
Partner Accredited Certified
  • 2 replies
  • 0 kudos

Resolved! Symantec Appliance or Data Domain or HP-Store Once?

I'm currently using Data Domain 860; replicating out to two Data Domain 670 appliances. The data feeding this is done from Symantec NetBackup v7.5.0.5 and 95% virtualized on VMWare; running on HP-P9500 and EMC-VMAXe SAN's (Both 8GB).   I can choos...

75gary by Level 4
  • 3 replies
  • 0 kudos

Resolved! Appliance backup lower than 20MB/s

In customer we have: 1 switch Procurve 1Gb/s 1 Appliance 5230 like media server with RAID6 (14TB) MSDP. Version  (name HOLLY) 1 Master Server with Netbackup 7.6 (name BEN) All licensed required... to acelerator, NDMP, deduplication, MSDP,...

Resolved! Client Installation failed SuSE2.6.16

HI  maby some can help we have two appliance server Netbackup 5220 and the master server is a windows2008 R2 version We have tried to install a Netbackup Client on a virtual machine with Suse2.6.16. Unfortunately we get following o...

Aramis31 by Not applicable
  • 2 replies
  • 0 kudos

NBU 5230/5030 Replication Encription solution

Hi All, I need a solution for both 5230 and 5030 appliances encripting  replicated data. We have two site  A and B so we what to enable encription the date to send from A to B.  I need solution to configure it Also it will be nice if you can let ...

turhan_sensoy by Level 5
Partner Accredited Certified
  • 6 replies
  • 1 kudos

5230 SAN VMware backups - seeing too many LUNS

We mapped SAN LUNs to each appliance using single target and single initiator zoning, but for some reason the appliance is detecting over 300+ path/device/disk (/dev/sg313). We only have about 77 LUNs provisioned on our SAN, so the high counts must b...

Obi_Wan by Level 3
Employee Accredited
  • 2 replies
  • 0 kudos

Netbackup Appliance Administration

This is a pretty baasci question, I just want to make sure I am doing this right. I am new to Netbackup appliances. I have a Netbackup 5230 appliance that is setup as the master server, and another one that will be at a different site, also server as...

Strange NTP behavior on appliances running 2.6.1

I have a number of appliances (5220, 5230, 5330) - all of which are exhibiting strange NTP config behavior.  On all appliances I get the following when running a Network-NTPServer-Show: <host>.Network> NTPServer Show - [Error] Failed to add the foll...

elanmbx by Level 6
  • 0 replies
  • 1 kudos

Resolved! Appliance and OpenSSL POODLE vulnerability...

Hi, does anyone know what we can do to mitigate this: Found this: …which links to this Poodle article:

sdo by Moderator
Partner    VIP    Certified
  • 3 replies
  • 3 kudos

Resolved! Mitigating IPMI vulnerability...

N5230 v2.6.1.2. Q1: I have been infiormed that the IPMI on our appliances are vulberable to a supposedly easily exploitable 'cipher zero IPMI attack'.  Is it possible to disable the IPMI features and just run it as an https port so that we can still...

sdo by Moderator
Partner    VIP    Certified
  • 3 replies
  • 0 kudos

Resolved! New Netbackup Appliance 5230 - Have a couple questions

I have been a Netbackup user for several years, however I am new to the appliance itsself and have some basic questions if someone can help.   It is my understanging that the appliance has basically 2 usable partitions, AdvancedDisk and MSDP. A cou...

AIR trought 10Gb NBU Appliance ports

Hello Experts I hope you are fine I need to configure a 5230 appliance to use one of the 10Gb port for AIR, my backups are comming to the apppliance using eth2 and SAN ports but I want the replication in AIR to use the 10Gb port   Hoq can I do tha...

josemlvega by Level 3
Partner Accredited Certified
  • 1 replies
  • 1 kudos

Resolved! Oracle Policy backup

I have two 5220 appliances, one that has the db pack installed, the other does not.  We have configured a backup on the appliance that does NOT have the db pack, using RMAN, to write a backup directly to the appliance.  I have the backup policy type ...