cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

Resolved! When registering an appliance...

N5230 v2.6.0.3 Settings > Alerts > Callhome Registration... ...is it best to specify: a) The address of the 'owner' of the hardware. ...or: b) The address of the 'physical location' of the the hardware. Thanks.

sdo by Moderator
Partner    VIP    Certified
  • 477 Views
  • 2 replies
  • 0 kudos

Net backup Appliance 5230 going to sleep mode.

Hi All,   we are conducting vulnerability Assessment (VA) test on Netbackup appliance 5230. when we are running the application , the Netbackup appliance going to sleep or hibernate mode. Is their any settings to change the same. Thanks , Karthik...

ckarthik by Level 3
Partner Accredited
  • 745 Views
  • 4 replies
  • 0 kudos

Need suggestion

Hi All, I have multiple appliances in our environment. We have added multiple appliances in storage group. I have few queries: 1: If server will be backed up on 1 appliance then will dedup work on all appliances or will it take full backup first o...

Resolved! Need to re-register Net-backup Appliance 5020

Hello Team,   I have a customer who wants to re-register his NetBackup Appliance 5020. The person under whom the appliance was registered has left the Organization. Customer would now like to change or transfer registration to his name from the x-e...

Sunil_G by Not applicable
Employee
  • 647 Views
  • 1 replies
  • 1 kudos

Resolved! How to delete DNS searchDomains from command line

Hello,   I made a very rookie mistake and added a "." before the search domains for my DNS information. I cannot resolve other hosts now.   I tried going in and removing it hostname.Network> DNS Delete SearchDomain .seachhere   However it will ...

Resolved! Symantec appliance 5230: BOMC

Hello   I have tow doubts about 5230 appliance (ver. 6.5):           1) To activate de BOMC option is not neccesary a license, is it?             2) Turn on the "BOMC option" cause some kind of interruption in the appliance (Stop de active polici...

Resolved! Upgrading Multiple 5220 Appliances

I have the following upgrade scenario with NBU and 5220 appliances, and am wondering how much of this I can perform concurrently.   Windows 2008R2 Master Server - recently upgraded to NBU 7611 - all OK 5220 Media Server 1 (72TB) - 2.5.3 5220 Medi...

SYMAJ by Level 6
Partner Accredited
  • 1650 Views
  • 8 replies
  • 1 kudos

Resolved! AIR with 50x0 appliance

A 5020 appliance is connected to 3 media servers. the 3 media servers are configured as storage servers and puredisk disk pool is created and allowed access to all the 3 media servers i have created a single storage unit, and selected to use all the...

Resolved! Root SSH access to NBU Appliance

Hi All, I have admin access to my NBU appliance but not the root access , Could anybody help me with how to enable ROOT SSH access ? I have tried searching WEB for it but i found no proper procedure to do . Thanks, Nayab

Nayabsk by Level 6
Partner Accredited
  • 16736 Views
  • 10 replies
  • 0 kudos

Appliance 5230 file system showing read only

Hi Friends,   I am facing an issue file system read only with appliance 5230 and cannot login on appliance via putty and getting below error. Pleas help me.   Appliance.Support> Maintenance <!-- Maintenance Mode --!> Error in tempfile() using ...

Priyeranjan by Level 4
Partner Accredited
  • 1537 Views
  • 4 replies
  • 3 kudos

Upgrading Netbackup appliance

All, I am planning to upgrade the two Netbackup appliances (NBU5220) in two different datacenters. Is it possible to upgrade the appliances remotely?. Is there any consideration I need to be aware of. The last time I upgraded I had to drive to each ...

bkup_sp by Level 2
Partner Accredited
  • 1043 Views
  • 7 replies
  • 0 kudos

5230 Appliance does not boot

Hello,   I just recently purchased a Symantec 5230 Appliance and I can't get it to boot.  It throws a buch of errors that says "Volume group "system" not found" and then asks me to fail back to /dev/system/root.  If I choose yes or no the Appliace ...

kproehl by Level 5
  • 681 Views
  • 2 replies
  • 0 kudos

NetBackup Appliance 5230 with solid amber status

Hi all, One of my NetBackup appliances was recently upgraded and after that, it's status LED in the Symantec Remote Management console has been solid amber. What could be the steps that I can follow in order to resolve this issue? Also, I generated...

Deduplication Appliances 1.4.5 is now available!

(Crossposted from the Netting out NetBackup blog) I'm very pleased to announce that the next Release Updates for Deduplication Appliances is now available! NetBackup 5000/5020/5030 Deduplication Appliances 1.4.5 is the latest patch release and can ...

CRZ by Level 6
Employee Accredited Certified
  • 549 Views
  • 0 replies
  • 2 kudos

Duplication job never finishes running

Running 2x NB 5220 (48 TB each) @ v. 7.6.0.2. All is well except for one job I'm trying to replicate from our master to the media server. Job size is about 1.6 TB. Everything appears normal,job details show writes occurring, job status hits 100%. Las...

NetBackup Appliances 2.6.1.1 is now available!

(crossposted from the Netting Out NetBackup blog) I’m extremely happy to announce that NetBackup Appliances 2.6.1.1 is now Generally Available! NetBackup Appliances 2.6.1.1 is the latest update for NetBackup 52xx (and 5330!) Applainces and the equi...

CRZ by Level 6
Employee Accredited Certified
  • 539 Views
  • 1 replies
  • 1 kudos