cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

Change of management port after NBU appliance upgrade

Hi, recently I helped a customer to upgrade their NBU 5230 appliance to 2.6.0.3 (previously it is 2.5.4). The appliance was setup as master server. The onboard network port eth0 is the management port. After upgrade, we found that the management port...

liuyang by Level 6
Partner Accredited
  • 1119 Views
  • 5 replies
  • 0 kudos

Resolved! HBA configuration is not saved after appliance reboot

Hi Support, Please I need a solution on how I can make my hba cards configuration persistant upon appliance reboot. I notice each time I reboot the appliance, all the hba cards return to the default mode, which is "initiator", whereas some were con...

amoramo by Level 4
Partner Accredited
  • 602 Views
  • 2 replies
  • 0 kudos

Resolved! NetBackup Appliance MSDP Dedupe ports not opened

Hi Support, I recently configure client-side deduplication on netbackup appliance 5230 running appliance v2.6.0.3. However, the client-side deduplication fails with error code 83 "Clients direct plugin not available" I got a technote that seems to ...

amoramo by Level 4
Partner Accredited
  • 1432 Views
  • 7 replies
  • 0 kudos

Resolved! Netbackup Appliances MSDP pool Capacity

Hi All,   I need to know how do we calculate the required disk space for customers that how much cpacity of MSDP pool they needed to manage their backup environment.  Actually I am facing difficulties with few customers, where MSDP pool is getting...

Priyeranjan by Level 4
Partner Accredited
  • 579 Views
  • 3 replies
  • 0 kudos

Resolved! limitation of streams

NetBackup 5220/5230 Appliance is preconfigured with 8 streams in total for the appliance. In many cases this is not a limiting factor with the notable exception of Oracle backup where the number of streams can be very high.   I know that many facto...

Rami_Nasser1 by Level 6
Partner Accredited Certified
  • 1461 Views
  • 2 replies
  • 0 kudos

Resolved! Exchange and EV backup dedupe ratio

Dear Experts, We have two appliances(5230 with 7.6.0.3) and we are designing what backup data should go where. I am wondering if putting Exchange and EV backups will improove dedupe ratio as both data are email data. Exchange 2010 and EV 10.0.3 wit...

Resolved! 2.6.0.3 Security

I keep an account on my 5220 that I use with WinSCP when I need to grab logs and such.  I recently upgraded to 2.6.0.3 and noticed my account no longer works on WinSCP.  When I attempt to su to this account, I get USER NOT AUTHORIZED.  This doesn't h...

SLindo by Level 3
  • 332 Views
  • 1 replies
  • 0 kudos

AIR replication is failing

Hi All,   I have master server on windows 2008 datacentre x64 and two 5230 Netbackup appliances. Main Site : One windows master server and one Netbackup 5230 appliance as media server DR site : One Netbackup 5230 appliace as media server.   I a...

Priyeranjan by Level 4
Partner Accredited
  • 3554 Views
  • 4 replies
  • 3 kudos

Resolved! NBU Appliance Vulnerability Scans....

I'm getting vulnerability tickets from our threat team on our netbackup appliances. IPMI 2.0 RAKP RMCP+ Authentication HMAC Password Hash Exposure and IPMI 2.0 Cipher Type Zero Authentication Bypass Vulnerability What is my best path of resolutio...

DPeaco by Moderator
   VIP   
  • 1016 Views
  • 1 replies
  • 0 kudos

AIR not happening for a client

Hello all NBU 5200 Appliance Version: 2.5.1, Appliance Version: 2.5.1   2 appliances at same version. scenario: i added a windows server CLIENT1(uppercase) to a test policy backup ran for 20 mins then I had to cancel it due to some other activity. ...

rookie11 by Moderator
   VIP   
  • 489 Views
  • 9 replies
  • 0 kudos

NetBackup Appliance v2.5.4 re-image failed

Hi Team, Kindly assist, I recently re-image my NetBackup Appliance 5230 running v2.5.4. However, the re-imaging did not complete successfully. I got this two errors below while the re-imaging is still booting: vxfs mount: vxfs: ERROR:V-321268: /dev...

amoramo by Level 4
Partner Accredited
  • 1059 Views
  • 14 replies
  • 0 kudos

Upgrade from 2.5.04 to 2.6.0.2 - MSDP Conversion

I recently performed an upgrade to a 5230 appliance from 2.5.0.4 to 2.6.0.2. The appliance has a newly configured MSDP pool with nothing on it. Will a conversion actually run on that new pool? Or since it is new will it be skipped? Thanks!

cfortenberry by Level 2
Partner Accredited
  • 481 Views
  • 4 replies
  • 1 kudos

Resolved! NetBackup Appliance upgrade 2.6.0.3 did not take effect

Hello Support Team, I recently upgraded my appliance version from 2.6.0.1 to version 2.6.0.3. However, the upgrade did not work. Before the upgrade I copied the image SYMC_NBAPP_update-2.6.0.3-1.x86_64.rpm into the appliance /inst/patch/incoming dir...

amoramo by Level 4
Partner Accredited
  • 1870 Views
  • 12 replies
  • 1 kudos

Resolved! NBU appliance upgrade and catalog

Hi, my customer has one NBU 5230 appliance which is currently running on 2.5.3 and it is configured as a master server. There are some clients which are backed up to this appliance's dedup pool. All clients are Windows clients (NBU 7.5.0.6 client). R...

liuyang by Level 6
Partner Accredited
  • 858 Views
  • 5 replies
  • 0 kudos