cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

Resolved! 5220 Appliance Reconfiguration

Hi I have a 4TB Appliance which is configured with the default disk pools of 744GB Adv disk and 2.9TB of Dedupe disk. Is it possible and supported to reconfigure this to delete the adv disk and use all available space dir deudpe data? If this is poss...

KeirL by Level 6
Partner
  • 180 Views
  • 2 replies
  • 0 kudos

No snmp traps sent

Hi all, I have a problem on two installed n5220 regarding SNMP  traps. I configured snmp server on web gui and command line, but no snmp traps are sent when power is removed for exemple, but i recevied email and web gui is red ! On the chinfo.txt fil...

Jechar by Level 5
Partner Accredited Certified
  • 664 Views
  • 2 replies
  • 0 kudos

Resolved! Upgrade Best Practice

#moved this to your own thread for you# Does anyone know "best practice"..  we have a 5200...  do you upgrade your master server (ours is windows) to 7.5.0.5 first and THEN the appliance?  Or the other way around?

Resolved! Direct connect between 5200 and 5220 -- possible??

So, we have a 5200 appliance and windows master in one domain, and a 5220 acting as its own master in another. Using Storage Lifecycle Policies, we are replicating between the 5200 and 5220.  Seems to be working OK, but the data is travelling on our ...

Resolved! VTL

  Can anybody using these resources help?   We are budgeting for next years upgrade and we have to decide if we want to go with a VTL or just raw disk for D2D(2T).  What are the advantages/disadvantages to either or both.   Some that we already know ...

Resolved! Copying Files From Appliance

Can someone explain to me how to copy files from an appliance to a Windows client? I hve tried utilities such as Winscp and PSCP without any luck.

dwilson by Level 4
  • 13104 Views
  • 9 replies
  • 1 kudos

SAN device errors on 5220

We have a 5220 running 2.5.1 connected via fibre to EMC Clariion CX4-480. We see a whole raft of errors in the datacollect logs such as:-   I/O error, dev sdfx, sector 0 sd 7:0:0:59: SCSI error: return code = 0x00000018 end_request: I/O error, dev ...

Ed_Carter by Level 4
Certified
  • 167 Views
  • 1 replies
  • 0 kudos

NBU Appliance 5220 won t send reports by email

Hi I m using a NBU Appliance 5220. I configured the smtp for Software admin and Hardware admin in the web interface. I received the test emails. But I do not receive : Host information such as: ■ Disk information. ■ Overall backup status. ■ Resu...

BertrandD by Level 3
Accredited
  • 964 Views
  • 8 replies
  • 0 kudos

Product Reliability

We have 8 5220 appliances and 4 5020 appliances at this point. We are increasing our count as I write this by adding an additional 6 5220 appliances and 8 5020 appliances. In the last six months we have replaced four array batteries in these devices....

Resolved! Any way to recover 5220 folder contents

Hi, I've been a very sill boy and somehow have managed to run an "rm -r *" within the /disk/databases/catalog/2 folder on my DR appliance. Not being a Linux guy is there anyway to recover this or have I stuffed it up. Your (very) stoopidly! Ed

Ed_Carter by Level 4
Certified
  • 336 Views
  • 5 replies
  • 0 kudos

NetBackup Appliance 5220

Hello All, I need to know what are the required Licenses of Netbackup, using Netbackup Appliance 5220 to support below. - Backup 10 TB. - Enable encryption. - Enable De duplication. - Backup Via SAN. - Three years support. Is it the same or there is ...

Resolved! VMware Datastore Zoning with Appliances

Very strange question came to me today. Datastore zoning must be done directly to Appliance or it should be via ESX!!! Also how to identify slot and port # from back side panel of appliance

V4 by Level 6
Partner Accredited
  • 2621 Views
  • 9 replies
  • 2 kudos

Resolved! Replication Failed

I think I have the same with NBU5200  2.5.2 ( so NBU 7.5.0.5 ) same message for me   Another regression ?   28.03.2013 06:52:04 - requesting resource LCM_stu_disk_chback01 28.03.2013 06:52:04 - granted resource LCM_stu_disk_chback01 28.03.2013 06:5...

fjacquet94250 by Level 2
Partner Accredited Certified
  • 1269 Views
  • 3 replies
  • 3 kudos

5220 PureDisk Volume Down

Hi, I have 2x5220 Master / Media appliances running 2.5.1 with external storage units, the PureDisk Volume is going down on one or other of the appliances every few weeks, it usually takes multiple reboots / full shudown to get it back up but it's hi...

DecKy by Level 4
  • 1247 Views
  • 11 replies
  • 1 kudos