Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

NetBackup Appliance 5220

Hello All, I need to know what are the required Licenses of Netbackup, using Netbackup Appliance 5220 to support below. - Backup 10 TB. - Enable encryption. - Enable De duplication. - Backup Via SAN. - Three years support. Is it the same or there is ...

Resolved! VMware Datastore Zoning with Appliances

Very strange question came to me today. Datastore zoning must be done directly to Appliance or it should be via ESX!!! Also how to identify slot and port # from back side panel of appliance

V4 by Level 6
Partner Accredited
  • 9 replies
  • 2 kudos

Resolved! Replication Failed

I think I have the same with NBU5200  2.5.2 ( so NBU ) same message for me   Another regression ?   28.03.2013 06:52:04 - requesting resource LCM_stu_disk_chback01 28.03.2013 06:52:04 - granted resource LCM_stu_disk_chback01 28.03.2013 06:5...

fjacquet94250 by Level 2
Partner Accredited Certified
  • 3 replies
  • 3 kudos

5220 PureDisk Volume Down

Hi, I have 2x5220 Master / Media appliances running 2.5.1 with external storage units, the PureDisk Volume is going down on one or other of the appliances every few weeks, it usually takes multiple reboots / full shudown to get it back up but it's hi...

DecKy by Level 4
  • 11 replies
  • 1 kudos

Resolved! 5220 Slow Backup Performance

Hi everyone. We recently invested in two 5220 36TB appliances to replace the 7.1 Windows media servers we were using. We are moving to (almost) tapeless backups and the appliances seemed a good a bet. We wil be running the two in alternate sites usin...

Ed_Carter by Level 4
  • 6 replies
  • 3 kudos

Resolved! netbackup 5200 change role from media to master server

goodmoring,  i have a physical windows server which has the master server role, a netbackup 5200 appliance with media server, i would like to decomission the windows server and just use the 5200 as master, how it is possible? thank you.  

emmegi by Level 3
Partner Accredited
  • 4 replies
  • 0 kudos

Resolved! reset the appliance password

Hi all , I need to know if any one can share with me how to reset the appliance 5020 or 5220 password in case if it was forgetten ? Regards,  

Rami_Nasser1 by Level 6
Partner Accredited Certified
  • 7 replies
  • 0 kudos

Netbackup Appliance 5220 2.5.2 Alerts Email

Hi, How can I stop the really annoying alerts from being emailed from the Netbackup Appliance followinf upgrading to 2.5.2 please? I get something like the following every few minutes. I have acknowleges and clear acknowledged the alerts but still th...

Resolved! Relocating a 'live' 5220 Appliance

I have a site with 3 x 5220's - 2 local and 1 remote.  Optimised replication is taking place between the local and remote 5220's. Initially we placed the remote 5220 on the primary site, to allow for 'seeding' of the initial backups to the 'remote' 5...

SYMAJ by Level 6
Partner Accredited
  • 5 replies
  • 0 kudos

client backups Status 87 & 83, with 5020 appliance

Hi, I have been encountering some issues with backups within a netbackup environment. The topology is  1 x Master server - RHEL 6.3 (virtualised) 2 x Symantec 5220 2.5.1 appliances (media servers) 2 x Symantec 5020 appliance...

Resolved! 5220 default root password?

While working with support last week, we "elevated" out of the clish. We then disabled the clish, I do not recall the directory of which we altered the file to disable the clish. Now, I can only login as admin but cannot search to locate the altered ...

NetBackup 5200/5220 Appliances 2.5.2 is now available!

(crossposted from the Netting Out NetBackup blog) I'm very pleased to announce that the next Release Update for NetBackup 52x0 Appliances is now available! NetBackup 5200/5220 Appliances 2.5.2 Release Update is the equivalent Appliance patch relea...

CRZ by Level 6
Employee Accredited Certified
  • 7 replies
  • 0 kudos

Resolved! Configure IOIO eth port

Doesn anyone know how to configure the IOIO port on the 5200.  Is it just a standard ethernet port that provides console access?  In the network settings nothing shows as a configurable console port.

Stanleyj by Level 6
  • 10 replies
  • 1 kudos

NetBackup 5220 appliance question

Hi everyone. Just wanted to ask if anyone has more information on host bus adapter support for the NetBackup 5220 appliance. Specifically, I'm validating if the appliance supports this: QLogic 8GB PCI-E quad port fibre channel HBA In the "Symantec Ne...

jgarcia1 by Not applicable
  • 3 replies
  • 0 kudos

Resolved! Resizing the Storage unit

I Had a requirement like this. The Advance disk storage unit size was 744GB. I had unallocated size of 500GB. I wanted to add 100GB to my existing Advance disk. So I will have 744GB + 100GB = 844GB. But when I resized with 100GB. The entire size beca...

Resolved! NBU Appliances 5200 5220 configuring SMTP "From"

i have a 5200 and a 5220, both at 2.5.1  Setup the SMTP server and the address for both software and hardware notifications, however, everything is being sent From: NoReply_NBU_Appliance@netbackup  so it gets caugth by our Spam service because it doe...