Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
Hi all, My nbu5220 used two ip address,one nic set to 10.20.40.123 connected to the 10.20.40.120/29 network, and one nic set to 10.20.100.236 connected to the 10.20.100.0/24 network,i want to backup all clients,how should i set it,thank you!
removed - workaround found
I have created a post in the netbackup forum and opened a ticket with support about this issue with no resolution. So i thought i would give the appliance section a try. Since upgrading to the 2.5 code i started receiving sql errors 13, 6, and 1's...
have a 2 node SPA that i want remove one content router. i deactivated the content router and finished rerouted all the data. now i want delete the content router from the SPA. i didn't see a cleear guide on this.
After reviewing other TECH-NOTES on this subject, which appear to be stagnant, I wanted to put this question out here to see if anyone can enlighten me ? I have implemented a configuration which includes two sites, each with a Master Server and a 522...
Hello All, Could someone please let me know if there is a way to view the current bandwidth and job that is being sent to 5020 device… We have a policy at our secondary data centre. We are trying to back up around 7TB from a file server and are getti...
Hi All , - Appliance 5220 (Model D) means contains 1G port 3 8G FC ports and 1 SAS port for the storage expantion - Appliance version :2.0 ( going to reimage the appliance to version 2.5 before start the configuration) - Tape library - 10 esxi hosts...
Hi Everyone, I know there have been lots of comments surrounding slow rehydration to tape from the appliances but mine is just to slow and the appliance can't keep up with the demand. Master server = Windows 2008 R2 SP1 NetBackup 7.5.0.3 Appliances 5...
Hi, We are having problems with duplication jobs on our Netbackup 5200 appliance. We use storage lifecycle policies to backup to the 5200 as the primary copy, and then duplicate off to tape. This has worked fine for months, but recently the duplicati...
Hi All, When you reimage an appliance, the IPsec credentials are removed during the process. The credentials are unique for each appliance and are included as part of the original factory image. The IPsec credentials are not included on the USB drive...
Hi, the Puredisk SPA Authorization Service is not starting on N5020, so it's impossible to use N5020. Last Night at 4.00AM Netbackup has lost contact with N5020, the error was 213. trying to update Storage Server credential now returns this error...
I am trying to Enable the SAN Client FT media server on out 5220 Appliance, but get the following error; "ERROR: Cannot enable the SAN Client Fibre Transport. Unsupported hardware configuration exists" I found someone else posted the exact same ...
Hello experts, Is there a way to observe FC traffic on 5220? Can I tell that the data coming IN or going OUT of te 5220 is over FC or ethernet? Regards, ESM
We were under the impression from sale demo that when the appliance disk gets full, that netbackup "sorta" started clearing some old backups to make space available. This was to keep backups from failing. Another words we may have retention policy t...
Guys, What is the benefit of installing OST on NetBackup 52xx appliance? Thanks
Hello, I upgraded NetBackup Master and Media Server from 7.5.0.1 to NB 7.5.0.4. After that we esperienced a problem with Oracle backups pointing to 5020 appliances (FW 1.4.2). Basically, the acitivity monitor shows a 10/15 minutes delay between the s...
I have a site where we have implemented 4 x 5020 appliances, each configured as a seperate device (no multi-node storage pools). Site is NBU 7104, with the appliances all at 1.4.2. There is 1 master and four media servers, and the appliances have be...
Hi all , please provide me with any documents that explaining how to use the command line inside the appliances 5020 and 5220 when iam using root acount not sysadmin. Regards,
Hello, I would like to backup the clients directly on the Netbackup Appliance 5220 through FC SAN. The client only has one FC-HBA (single port) already connected with a Storage Array. Can I use the same FC-HBA to backup on the Appliance 5220 (I will ...
Hello, We have a great problem with our Netbackup Appliances 5220. If the Dedup-pool raise by filling over 80% on the appliance, the dedup-pool go offline automaticly and the state is down !!! Backups jobs to the dedup-pool of the appliance are ...