cancel
Showing results for 
Search instead for 
Did you mean: 

AIR with Data Domain

PranavB
Level 4

Geeks !

 

Good Day !

 

We have setup AIR using DDBOOSt association and SLP's are going fine. The issue we are facing is that we getting very low throughput ,we also tried manually duplicating the images to target DD and even those are going slow.

 

sysadmin@source# ddboost association show
Local Storage Unit   Direction      Remote Host   Remote Storage Unit
------------------   ------------   -----------   -------------------
air_source-psu     replicate-to   dest_host      air_dest-rsu

------------------   ------------   -----------   -------------------

So ,my point is do we need to also setup trust relationship b/w two masters as we have not yet and have simply conffigured AIR using Data Domain.

Storage units are created perfectly using Disk pool created on source and target Data Domain storage units.

What all parameters we need to check as everything looks fine on the network side.

 

Thanks,

PranavB

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified


... we also tried manually duplicating the images to target DD and even those are going slow.

You will need to involve network and DD support team. Hopefully a dedicated network link was provided between the two DD's? Not using the production network?

 

.... do we need to also setup trust relationship b/w two masters ..?

Only Disk Pools and SLPs on Source and Target master.

See the Solution in this post: Step by step guide for AIR on DataDomain 

 

 

View solution in original post

1 REPLY 1

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified


... we also tried manually duplicating the images to target DD and even those are going slow.

You will need to involve network and DD support team. Hopefully a dedicated network link was provided between the two DD's? Not using the production network?

 

.... do we need to also setup trust relationship b/w two masters ..?

Only Disk Pools and SLPs on Source and Target master.

See the Solution in this post: Step by step guide for AIR on DataDomain