cancel
Showing results for 
Search instead for 
Did you mean: 

Adding San Client in cluster

Abhisheknetback
Level 6
Certified

Dear Frineds ,

I have to configure san client in Cluster enviorment ,so as per SAN Client admin guide i ran the following command .

1.   nbemmcmd –addhost –machinename virtual_name –machinetype app_cluster
 

2. nbemmcmd –updatehost –add_server_to_app_cluster –machinename client_name –clustername virtual_name

1st command ran sucessfully but 2nd command giving output that command didn't completed sucessfully.

Master Server is :- Windows 2008 R2 Enterprises.

FT Media is Linux

Client is AIX.

Note :- Client is not been configured as SAN client so far , like zoning and driver creation . i was running these command first but did not sucess .

Please Help

 

Thank You !!

1 ACCEPTED SOLUTION

Accepted Solutions

V4
Level 6
Partner Accredited

if something JUST WORKED doesn't mean it should work .... there is process outlined thus need to follow steps

Its node which are actual SAN client not the virtual name... 

virtual name is to get NBU understand SAN CLIENT are actually nodes of CLUSTER hence we create app cluster and add nodes in it.

Better remove app cluster for now.. 

start from beginning and let us know if you still face the same issue.

View solution in original post

9 REPLIES 9

V4
Level 6
Partner Accredited

You first need to install NBU and configure SAN clients then add them in app cluster

refer this http://www.symantec.com/docs/HOWTO35943

http://www.symantec.com/docs/TECH153120

http://www.symantec.com/docs/HOWTO66272

FT services must be running on both nodes

if link is not loading google it for cached text version

Configuring SAN clients in a cluster

 

RiaanBadenhorst
Moderator
Moderator
Partner    VIP    Accredited Certified

Share the error

Abhisheknetback
Level 6
Certified

Hi Riaan ,

This is only error command didn't completed sucessfully..

 

 

Thank You

Abhisheknetback
Level 6
Certified

Jack ,

NBU is installed jast it is not configured as san client , without configured as san client you can not add in emm???

if not then why it add to virtual name of cluster and not to nodes ??

 

 

Thanks

V4
Level 6
Partner Accredited

if something JUST WORKED doesn't mean it should work .... there is process outlined thus need to follow steps

Its node which are actual SAN client not the virtual name... 

virtual name is to get NBU understand SAN CLIENT are actually nodes of CLUSTER hence we create app cluster and add nodes in it.

Better remove app cluster for now.. 

start from beginning and let us know if you still face the same issue.

Abhisheknetback
Level 6
Certified

Hi Jack ,

After configuring as san client this command ran sucessfully .

 

Thanks You

V4
Level 6
Partner Accredited

glad to have you helped... hope you must be enjoying throughput of SAN client :)

Abhisheknetback
Level 6
Certified

Yes ,

 

:)

AndresV
VIP
Partner    VIP   

hi,

I´m facing the same problem could you tell me how did you "add as san client"