cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
1 Solution

Accepted Solutions
Highlighted
Accepted Solution!

All 'normal' rules apply to

All 'normal' rules apply to Appliances.

So, an appliances configure as master can be configured as BMR master, same as any other master.

Appliance configured as media server cannot be BMR master, same as any other media server. 

Use the BMR Admin Guide http://www.symantec.com/docs/DOC5163 to config BMR.

The topic Enabling BMR from the appliance GUI in the Appliance Admin Guide is therefore not applicable in your environment.

View solution in original post

8 Replies
Highlighted

any idea!!!!

any idea!!!!

Highlighted

have you a seprate Netbackup

have you a seprate Netbackup master server machine? if no then your media server is also a master server just edit bp.conf file and add the host name as a master server also.

Highlighted

I have check BMR admin guide

I have check BMR admin guide that the BMR option can be enabled from GUI if the appliance configured as master server,

You have a master server in your environment, right?

Only the master server can be BMR master.  Just follow steps in the BMR Admin Guide.

Highlighted

Hi ,   thanks for both of

Hi ,

 

thanks for both of you,

yes i have sperate master server my appliance configured only as Media server ,

i got confised becouse i have seen in the admin guide that BMR cane be enable from the appliance if it is only configured as a master server , which is not my case,

Thnaks,

Highlighted
Accepted Solution!

All 'normal' rules apply to

All 'normal' rules apply to Appliances.

So, an appliances configure as master can be configured as BMR master, same as any other master.

Appliance configured as media server cannot be BMR master, same as any other media server. 

Use the BMR Admin Guide http://www.symantec.com/docs/DOC5163 to config BMR.

The topic Enabling BMR from the appliance GUI in the Appliance Admin Guide is therefore not applicable in your environment.

View solution in original post

Highlighted

TThanks Marianne, its working

TThanks Marianne, its working fine and the master configured as a BMR server,

 

i am facing an issue now with SRT, SRT created for Win 32 bit and 64 bit  netbakup pkg's 7.5 add to both SRT's but when i am trying to add the maintinaceback patch 7.5.0.6 for netbackup client SW  i am getting the bellow error :

 

"installation of netbackup maintenance pack to the SRT failed "

 

i am following the correct steps in the bellow :

http://www.symantec.com/business/support/index?page=content&id=TECH140029

 

 but still getting the same error.

any recomendation's?

Highlighted

thanks all,   i download the

thanks all,

 

i download the SW again , the issue was with maintenance patch update,

 

 

Highlighted

sounds good

sounds good