cancel
Showing results forΒ 
Search instead forΒ 
Did you mean:Β 
1 ACCEPTED SOLUTION

Accepted Solutions

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

All 'normal' rules apply to Appliances.

So, an appliances configure as master can be configured as BMR master, same as any other master.

Appliance configured as media server cannot be BMR master, same as any other media server. 

Use the BMR Admin Guide http://www.symantec.com/docs/DOC5163 to config BMR.

The topic Enabling BMR from the appliance GUI in the Appliance Admin Guide is therefore not applicable in your environment.

View solution in original post

8 REPLIES 8

thamerthamer
Level 4
Partner

any idea!!!!

mnakhan
Level 5
Partner Accredited Certified

have you a seprate Netbackup master server machine? if no then your media server is also a master server just edit bp.conf file and add the host name as a master server also.

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

I have check BMR admin guide that the BMR option can be enabled from GUI if the appliance configured as master server,

You have a master server in your environment, right?

Only the master server can be BMR master.  Just follow steps in the BMR Admin Guide.

thamerthamer
Level 4
Partner

Hi ,

 

thanks for both of you,

yes i have sperate master server my appliance configured only as Media server ,

i got confised becouse i have seen in the admin guide that BMR cane be enable from the appliance if it is only configured as a master server , which is not my case,

Thnaks,

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

All 'normal' rules apply to Appliances.

So, an appliances configure as master can be configured as BMR master, same as any other master.

Appliance configured as media server cannot be BMR master, same as any other media server. 

Use the BMR Admin Guide http://www.symantec.com/docs/DOC5163 to config BMR.

The topic Enabling BMR from the appliance GUI in the Appliance Admin Guide is therefore not applicable in your environment.

thamerthamer
Level 4
Partner

TThanks Marianne, its working fine and the master configured as a BMR server,

 

i am facing an issue now with SRT, SRT created for Win 32 bit and 64 bit  netbakup pkg's 7.5 add to both SRT's but when i am trying to add the maintinaceback patch 7.5.0.6 for netbackup client SW  i am getting the bellow error :

 

"installation of netbackup maintenance pack to the SRT failed "

 

i am following the correct steps in the bellow :

http://www.symantec.com/business/support/index?page=content&id=TECH140029

 

 but still getting the same error.

any recomendation's?

thamerthamer
Level 4
Partner

thanks all,

 

i download the SW again , the issue was with maintenance patch update,

 

 

mnakhan
Level 5
Partner Accredited Certified

sounds good