I have been facing a problem with tapes.
Most of the times required tapes are already available in the physical libraries, but not assigned to any logical library. At the same time, if i run the inventory on the master server, i can't see the tapes. So each time, I have to confirm with the data center person to know the status of the tapes and then i assign it to logical libraries.
Can it be possible, that the moment any tapes get loaded to the library, it will be auto-assigned to the concerned logical library? Please advise.
Solved! Go to Solution.
If the library has multiple partitions then generally it would prompt the user upon loading tapes into the load port to select the partition they should be assigned to.
If you library however only has one partition then you should be able to set it to do it automatically
The Quantum i500 is a classic example that does this - even when it only has one partition by default it prompts on the display .. and there is no where in the Web Interface to change the setting either!
Let us know which library you have to assist further but for an i500 it can be done from the front panel via System Settings - Manual Cartridge Assignment - disable
Hope this helps