02-15-2015 08:09 PM
Backup Job failed with EC 213 (no storage units available for use)
Master server: NBU 7.6 : Solaris
Media server : NBU 7.6 : Linux
Client server : NBU 7.6 : Linux
Failed job status :
02/14/2015 03:41:34 - Info nbjm (pid=20899) starting backup job (jobid=3119826) for client XXX, policy XXX_FS, schedule Full
02/14/2015 03:41:34 - Info nbjm (pid=20899) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=3119826, request id:{AA3091DA-B42D-11E4-98AB-6805CA073A3A})
02/14/2015 03:41:34 - requesting resource YYY_SD_STU
02/14/2015 03:41:34 - requesting resource ZZZ.NBU_CLIENT.MAXJOBS.XXX
02/14/2015 03:41:34 - requesting resource ZZZ.NBU_POLICY.MAXJOBS.XXX_FS
02/14/2015 03:41:50 - Error nbjm (pid=20899) NBU status: 213, EMM status: Storage units are not available
no storage units available for use (213)
Investigation so far :
* Verified that the media server has not been deactivated for the storage unit or units that are unavailable.
* Verified the following attribute settings for all storage units:
* For disk storage units, the Maximum concurrent jobs is not set to 0
* Determined if all storage units are set to On demand only for a combined policy and schedule that does not require a specific storage unit. In this case, either specify a storage unit for the policy and the schedule combination or turn off On demand only for a storage unit.
* If the storage unit is on a UNIX or Linux NetBackup media server, it may indicate a problem with bpcd. Check /etc/inetd.conf on the media server to verify that the bpcd entry is correct.
Experts, Can you Please help to fix this issue
Solved! Go to Solution.
02-26-2015 08:47 PM
Issue has been Resolved, issue is with OS .. server has been crashed... now its fixed (bpclntcmd -clear_host_cache)
02-20-2015 03:34 AM
Please show us the policy config:
bppllist policy XXX_FS -U
and STU config:
bpstulist -U
Check if devices are UP -
for tape, check with this command on the master server:
vmoprcmd
For disk :
nbdevquery -listdp -U
02-26-2015 08:47 PM
Issue has been Resolved, issue is with OS .. server has been crashed... now its fixed (bpclntcmd -clear_host_cache)