10-21-2012 09:00 PM
Backup on client XXXXX for user root by server XXXX1 failed.
Status = No drives are available.
I have seen this error alot of time on my one of client but when i checked the status of that client it showing connected.
So pls help
Solved! Go to Solution.
10-21-2012 09:07 PM
Extract:
NetBackup status code: 2001
Message: No drives are available for this job
Explanation: Ajob requested a tape drive, but no eligible drive path was configured for the job.
Recommended Action: Try the following:
■ Verify that the required drives and robots are configured and up.
■ Verify that ltid is active and a drive path exists that is configured on the drive for the media server that the storage unit requires.
■ If the job requires an NDMP drive path, verify that one exists.
10-21-2012 09:07 PM
Extract:
NetBackup status code: 2001
Message: No drives are available for this job
Explanation: Ajob requested a tape drive, but no eligible drive path was configured for the job.
Recommended Action: Try the following:
■ Verify that the required drives and robots are configured and up.
■ Verify that ltid is active and a drive path exists that is configured on the drive for the media server that the storage unit requires.
■ If the job requires an NDMP drive path, verify that one exists.
10-22-2012 01:41 AM
Hi,
Please post the o/p of "vmoprcmd -dp -h <media_server>"..
Are all drives are down??...may be possible that job is refering to diff. STU under which no drives are available.
Thanks.
10-22-2012 07:10 AM
This error should not be specific for a client backup ...unless that client is a SAN client sending backups to FT media server .... Please confirm if it is a SAN client.