08-26-2010 07:49 AM
Solved! Go to Solution.
08-26-2010 08:46 AM
08-26-2010 08:01 AM
1 If the media server has disk pools configured, remove the media server from
the storage units that use those disk pools. For each storage unit, run the
following command on the master server:
/usr/openv/netbackup/bin/admincmd/bpsturep -label
storage_unit_label -delhost host_name
Replace storage_unit_label with the name of the storage unit and host_name
with the name of the media server.
2 If the media server is the only storage server for the disk pools, change the
state of the disk pools to DOWN. To do so, enter the following command on
the master server for each disk pool:
/usr/openv/netbackup/bin/admincmd/nbdevconfig -changestate -stype
server_type -dp disk_pool_name -state DOWN
Replace server_type with the type of storage server: AdvancedDisk, PureDisk,
or the vendor string that identifies the OpenStorage server type.
Replace disk_pool_name with the name of the disk pool.
3 For each disk pool, do the following:
■ Remove the media server from disk pool access by entering the following
command on the master server:
/usr/openv/netbackup/bin/admincmd/nbdevconfig -changedp -dp
disk_pool_name -stype server_type -del_storage_servers
storage_server
Replace disk_pool_name with the name of the disk pool.
Replace server_type with the type of storage server: AdvancedDisk,
PureDisk, or the vendor string that identifies the OpenStorage server type.
Replace storage_server with the name of the media server.
■ If the disk pool is on disk storage available only to the media server and
is no longer required, delete the disk pool as follows:
/usr/openv/netbackup/bin/admincmd/nbdevconfig -deletedp -dp
disk_pool_name -stype server_type
08-26-2010 08:46 AM