cancel
Showing results for 
Search instead for 
Did you mean: 

Command sequence for AIR configuration

vishal_nechclst
Level 4

Hi,

 

I am trying to configure AIR with the help of commands.

please send me command sequence for AIR (auto image replication) for PureDisk based setting.

I required the command sequence for below doc.

 

Thanks in advance.

5 REPLIES 5

Mark_Solutions
Level 6
Partner Accredited Certified

You are asking quite a lot here for someone to do all this for you - there are an awful lot of commands involved to do all of this.

As you have your process document and know the steps needed then work through each one in conjunction with the NetBackup Commands Guide : http://www.symantec.com/docs/DOC5182

The main commands involved will be nbemmcmd, nbdevconfig, bpstuadd

Hope this helps - maybe someone does have the free time to do all of this for you but i have my doubts

Good luck

vishal_nechclst
Level 4

Ok.

Thanks for your reply.

Could you please share command to add replication target on master server.

 

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

Why not simply use the GUI?

If you are not a consultant who needs to do this on a daily basis at multiple sites, I really don't see the need for commands and/or scripts.

I bet even Mark (who is a consultant and has configured this more than any other person that I know) is using the GUI. It is only a couple of short steps and clicks...

vishal_nechclst
Level 4

Hi Marianne,

Thanks for reply !

 

But i requried commands for Automation.

Mark_Solutions
Level 6
Partner Accredited Certified

It will be nbdevconfig to do it but i haven't pinned down the latest command for it yet

This tech note indicates a new -setreplicationconfig switch but not many details and it doesnt recognise it on my 7.5 system

http://www.symantec.com/docs/HOWTO72710

You will have to keep digging or hope someone from Symantec has access to the latest commands