cancel
Showing results for 
Search instead for 
Did you mean: 

Configure Netbackup SAN Client and FT(Fibre Transport) Server issue

tornado1987
Level 2

Hi guys,i have problem relate to FT Service

I have configured Netbackup 7.7.3 in below condition

My Environment Entity

Master & Media Server : Win2012 + Emulx HBA
Tape Library : MSL 2024
Backup Client : OracleLinux 5.8 + Emulx HBA (PBX service must run on the SAN clients)
Backup version : Netbackup 7.7.3(SAN Client License)
zoning the both FT media and San clinet HBA port together also Tape Drive & Storage

I have taken all backup successfully then all traffic passed on Network interface so when i have huge data
it will take a long time or mabye it will be failed so I want to configure LanfreeBackup (FT Service ) pass all Traffic on Fibre infrastructure

in first question Can i configured Windows Server 2012 media server as FT media server ?
It is a must to use the Support HCL HBA Model from QLogic for FT media and San client?(But i have Emulex on Servers)

in addition in many forum say to me which i should change HBA mode to Target mode on Media Server
But i dont know how can i change HBA mode to Target mode on Media Server (Linux)?

 

please help me.

1 REPLY 1

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

Windows is not supported as FT Media server.
Only Solaris SPARC, RHEL and SLES with certain models QLogic HBAs.

Please consult NBU 8 HCL: http://www.veritas.com/docs/000115690