After upgrading the NetBackup client to NetBackup 10 Vendor method is not working for archive backup. We have upgrade the client from NetBackup 8.1.1 to 10. Only one node is upgraded. Still archive backups get success in node 2. In node one Archive backup not starts. Vendor method is configured for the LOGARCHMETH2. Please check the following output for the configured archive methods and status.
$ db2 get db cfg for xmndb | grep -i logarc First log archive method (LOGARCHMETH1) = DISK:/dbarchfs/ARCH_LOGS/ Archive compression for logarchmeth1 (LOGARCHCOMPR1) = OFF Options for logarchmeth1 (LOGARCHOPT1) = Second log archive method (LOGARCHMETH2) = VENDOR:/usr/openv/netbackup/bin/nbdb2.sl64 Archive compression for logarchmeth2 (LOGARCHCOMPR2) = OFF Options for logarchmeth2 (LOGARCHOPT2) =
$ db2pd -logs -db XMNDB Database Member 0 -- Database XMNDB -- Active -- Up 386 days 04:28:00 -- Date 2022-06-22-18.09.06.272877 Logs: Current Log Number 197201 Pages Written 135447 Cur Commit Disk Log Reads 1 Cur Commit Total Log Reads 3 Method 1 Archive Status Success Method 1 Next Log to Archive 197201 Method 1 First Failure n/a Method 2 Archive Status Failure Method 2 Next Log to Archive 197201 Method 2 First Failure 197099 Log Chain ID 1 Current LSO 201380592994029 Current LSN 0x0000003488E917A2 Address StartLSN StartLSO State Size Pages Filename 0x0A000401352DEDA0 0000003488D87D5D 201380040909505 0x00000000 262144 262144 S0197201.LOG 0x0A000401348FCA00 0000000000000000 201381109408449 0x00000000 262144 262144 S0197202.LOG 0x0A00040134396360 0000000000000000 201382177907393 0x00000000 262144 262144 S0197203.LOG 0x0A000401348FADE0 0000000000000000 201383246406337 0x00000000 262144 262144 S0197204.LOG 0x0A0004013439CCC0 0000000000000000 201384314905281 0x00000000 262144 262144 S0197205.LOG 0x0A00040134900000 0000000000000000 201385383404225 0x00000000 262144 262144 S0197206.LOG 0x0A000401352EA360 0000000000000000 201386451903169 0x00000000 262144 262144 S0197207.LOG 0x0A000401352E92C0 0000000000000000 2013875204
Are you positive the upgrade was the cause?
Last week I upgraded a client from 8.2 to 188.8.131.52 and the DB administrator claimed the upgrade was the cause of the archiving stopping. Meanwhile, the logs stopped 20 minutes prior to my upgrade. In my case, there wasn't anything wrong with Netbackup. All configuration was correct and unchanged but after he stopped and started the DB (due to planned work) the archiving started working again.
Create UNIX: /usr/openv/netbackup/logs/bpdb2
make sure db2 can write in the area, no restart of services is required. The log files will tell what happens from the Netbackup side.