01-05-2015 11:32 AM
hi
i did install Netbackup Master Server and Media Server
and then, i do Device Configuration.
however, Master Server Drive path ditch is Media Server Drive Path different from each other.
but Serial Number is same
there is a problem in the SAN backup?
san zoning is ok
please check this
All OS : Solaris 11.2
All Netbackup Version : 7.6.0.4
Solved! Go to Solution.
01-05-2015 02:08 PM
The drive path may different on each server.
For example on the master the drive might be path 0cbn and on the media it might be 1cbn.
This does not matter and is perfectly normal.
It is advisable to set persistent binding to prevent the paths changing once configured.
You mention a problem in the San backup, is there an issue or are you asking if your configuration could cause an issue ? You will need to explain this part in more detail.
However current paths for the same drive on different servers is not an issue and seen in almost all sso environments. NBU uses the serial number of the drive to tack it, not the path.
01-05-2015 02:08 PM
The drive path may different on each server.
For example on the master the drive might be path 0cbn and on the media it might be 1cbn.
This does not matter and is perfectly normal.
It is advisable to set persistent binding to prevent the paths changing once configured.
You mention a problem in the San backup, is there an issue or are you asking if your configuration could cause an issue ? You will need to explain this part in more detail.
However current paths for the same drive on different servers is not an issue and seen in almost all sso environments. NBU uses the serial number of the drive to tack it, not the path.