cancel
Showing results for 
Search instead for 
Did you mean: 

ERR - Unable to backup System State or Shadow Copy

jaime_g
Level 4

Hi guys.

ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.INF - Estimate:-1 -1

 

I triggered a BMR backup a months ago and it was successful. But when I triggered again a BMR backup yesterday, it failed and i got an error message.

This error messages display while im performing BMR backup on a SQL server. 

Netbackup version: 7.1.0.4 

Client OS: windows 2003 r2 standard SP2

Snapshot provider: Microsoft Volume Shadow Copy Service (VSS)

 

This is the detailed status of the failed backup job.:

 

 12/4/2013 12:57:31 AM - Info nbjm(pid=4440) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=139050, request id:{5FF2E43A-42B7-4293-B093-D1D8E92DAE36})  

12/4/2013 12:57:31 AM - requesting resource zmunnbu2_dedupe_stu
12/4/2013 12:57:31 AM - requesting resource zmunnbu2.NBU_CLIENT.MAXJOBS.zmunsnddw01
12/4/2013 12:57:31 AM - requesting resource zmunnbu2.NBU_POLICY.MAXJOBS.zmunsnddw01_bmrbackup_monthly
12/4/2013 12:57:31 AM - granted resource zmunnbu2.NBU_CLIENT.MAXJOBS.zmunsnddw01
12/4/2013 12:57:31 AM - granted resource zmunnbu2.NBU_POLICY.MAXJOBS.zmunsnddw01_bmrbackup_monthly
12/4/2013 12:57:31 AM - granted resource MediaID=@aaaak;DiskVolume=PureDiskVolume;DiskPool=zmunnbu2_dedupe_disk_pool;Path=PureDiskVolume;StorageServer=zmunnbu2;MediaServer=zmunnbu2
12/4/2013 12:57:31 AM - granted resource zmunnbu2_dedupe_stu
12/4/2013 12:57:31 AM - estimated 44580081 Kbytes needed
12/4/2013 12:57:31 AM - Info nbjm(pid=4440) started backup job for client zmunsnddw01, policy zmunsnddw01_bmrbackup_monthly, schedule Full_monthly on storage unit zmunnbu2_dedupe_stu
12/4/2013 12:57:31 AM - started process bpbrm (1400)
12/4/2013 12:57:36 AM - connecting
12/4/2013 12:57:38 AM - Info bpbrm(pid=1400) starting bpbkar32 on client         
12/4/2013 12:57:38 AM - connected; connect time: 00:00:02
12/4/2013 12:57:42 AM - Info bpbkar32(pid=1520) Backup started           
12/4/2013 12:57:42 AM - Info bptm(pid=2840) start            
12/4/2013 12:57:42 AM - Info bptm(pid=2840) using 262144 data buffer size        
12/4/2013 12:57:42 AM - Info bptm(pid=2840) setting receive network buffer to 1049600 bytes      
12/4/2013 12:57:42 AM - Info bptm(pid=2840) using 30 data buffers         
12/4/2013 12:57:43 AM - Info bptm(pid=2840) start backup           
12/4/2013 12:57:53 AM - Info bptm(pid=2840) backup child process is pid 7120.6856       
12/4/2013 12:57:53 AM - Info bptm(pid=7120) start            
12/4/2013 12:57:53 AM - begin writing
12/4/2013 1:31:19 AM - Error bpbrm(pid=1400) from client zmunsnddw01: ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.INF - Estimate:-1 -1
12/4/2013 2:29:07 AM - Error bpbrm(pid=1400) from client zmunsnddw01: ERR - failure reading file: C:\Program Files\BakBone Software\NetVault\etc\process manager service.lck (WIN32 33: The process cannot access the file because another process has locked a portion of the file. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\PPSMonitoring.mdf (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\PPSMonitoring2.mdf (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\PPSMonitoring2_log.LDF (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\PPSMonitoring_log.LDF (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\ReportServer.mdf (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\ReportServerTempDB.mdf (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\ReportServerTempDB_log.LDF (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\ReportServer_log.LDF (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\SharePoint_AdminContent_78f17ae8-115d-42b4-adc3-d9b22f9e4e86.mdf (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open file: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\SharePoint_AdminContent_78f17ae8-115d-42b4-adc3-d9b22f9e4e86_log.LDF (WIN32 32: The process cannot access the file because it is being used by another process. )
12/4/2013 2:52:21 AM - Info bpbrm(pid=1400) from client zmunsnddw01: TRV - last message being suppressed after 10 occurrences 
12/4/2013 6:55:35 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open object: Shadow Copy Components: (BEDS 0xE000FECB: A failure occurred accessing the backup component document.)
12/4/2013 6:55:35 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open object: Shadow Copy Components:\System Service\Event Logs\Event Logs (BEDS 0xE000FEDD: A failure occurred accessing the object list.)
12/4/2013 6:55:35 AM - Warning bpbrm(pid=1400) from client zmunsnddw01: WRN - can't open object: Shadow Copy Components:\System Service\Windows Management Instrumentation\WMI (BEDS 0xE000FEDD: A failure occurred accessing the object list.)
12/4/2013 6:55:35 AM - Error bpbrm(pid=1400) from client zmunsnddw01: ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.INF - EXIT STATUS 69: invalid filelist specification
12/4/2013 6:55:35 AM - Error bptm(pid=7120) socket operation failed - 10054 (at child.c.1294)      
12/4/2013 6:55:35 AM - Error bptm(pid=7120) unable to perform read from client socket, connection may have been broken 
12/4/2013 6:55:58 AM - Info zmunnbu2(pid=2840) StorageServer=PureDisk:zmunnbu2; Report=PDDO Stats for (zmunnbu2): scanned: 35775024 KB, stream rate: 265.68 MB/sec, CR sent: 58940 KB, dedup: 99.8%
12/4/2013 6:55:59 AM - Error bpbrm(pid=1400) could not send server status message       
12/4/2013 6:56:01 AM - end writing; write time: 05:58:08
12/4/2013 6:56:06 AM - Info bpbkar32(pid=1520) done. status: 13: file read failed       
file read failed(13)
 
 
Tried to restart NBU services on both server and client but still backup failed with same errir message.
 
I really need help. Thank you!
 
 
 
 
 
1 ACCEPTED SOLUTION

Accepted Solutions

jaime_g
Level 4

Hi guys!

 

Thanks for the info! 

I manually specified a VSS provider on the client machine by this command:

w2koption.exe -backup -snapshotprovidertype 1

then I ran a backup on the Master server and It backed up successfully!

 

Cause:

When backing up a windows 2003, the VSS provider must be a Microsoft Software Shadowss Copy by default

If you have more than one provider registered on a Windows Server 2003-based computer. the Microsoft Software Shadow Copy Provider (a.k.a. the System Provider) will likely not be used by default and that causes an error

Solution:

In the NetBackup version 7.1 and higher client , there is a w2koption command to force NetBackup to use a manually specified provider.

The 'w2koption' command located in the ....netbackup\bin\  directory provides functionality to force the NBU Client to use a particular provider type.

w2koption -backup -snapshotprovidertype <0, 1, 2, 3> 

0   (Let Microsoft Windows decide which provider to use)
1   (Selects System VSS provider)
2   (Selects Software VSS provider)
3   (Selects Hardware VSS provider)

Example to configure NBU to use the System Provider:
     w2koption -backup -snapshotprovidertype 1

 

See the link below for TECHNOTE:

http://www.symantec.com/business/support/index?page=content&id=TECH158127

View solution in original post

13 REPLIES 13

jaime_g
Level 4

need help

sri_vani
Level 6
Partner

Hello Jaime,

What is your policy selection list?

ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.INF - EXIT STATUS 69: invalid filelist specification

This is related to VSS issue.

Run Vssadmin List Writers ....

Verify if there are any errors.

Visit Microsoft site for latest VSS hotfix for your client.

some times reboot will fix these kind of issues.

 

jaime_g
Level 4

Hi,

Thanks for your response. 

ALL_LOCAL_DRIVES is my backup selection

 

Ran Vssadmin list writers: results are  stable and No errors.

 

 

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

Please check the state of VSS and associated Writers.

Have you seen this? 

Have you checked state of VSS writers?

Please check the Microsoft Support site for latest VSS hotfixes.
I believe this is one of the 'newer' VSS hotfixes : http://support.microsoft.com/kb/940349

Please also add all SQL database files to the Client's Exclude List:
*.mdf
*.ldf

These database files cannot be backed up with normal MS-Windows backup while SQL is up and running.

 

 

jaime_g
Level 4

Tried to reboot the client, test backup but it still failed

I also tried to access the client and backup the System State using NTbackup (win2003) but it still failed

 

I'm very confuse why my previous backup was successful. I didnt change anything with its configuration including the policy but still failing.

jaime_g
Level 4

I check the list writers before I perform a NTbackup. 

vss list writers all stable.png

jaime_g
Level 4

VSS writers are all stable and no error but when i perform NTbackup it still fails

6.png

jaime_g
Level 4

yes, please see my comments

jaime_g
Level 4

Hi,

Thanks for your response. 

ALL_LOCAL_DRIVES is my backup selection

 

Ran Vssadmin list writers: results are  stable and No errors.

 

tried to reboot but still the backup failed

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

Good thing that you tried ntbackup. This takes NBU completely out of the picture and makes it a Microsoft issue.

Excellent blog in above post! yes

jaime_g
Level 4

Hi guys!

 

Thanks for the info! 

I manually specified a VSS provider on the client machine by this command:

w2koption.exe -backup -snapshotprovidertype 1

then I ran a backup on the Master server and It backed up successfully!

 

Cause:

When backing up a windows 2003, the VSS provider must be a Microsoft Software Shadowss Copy by default

If you have more than one provider registered on a Windows Server 2003-based computer. the Microsoft Software Shadow Copy Provider (a.k.a. the System Provider) will likely not be used by default and that causes an error

Solution:

In the NetBackup version 7.1 and higher client , there is a w2koption command to force NetBackup to use a manually specified provider.

The 'w2koption' command located in the ....netbackup\bin\  directory provides functionality to force the NBU Client to use a particular provider type.

w2koption -backup -snapshotprovidertype <0, 1, 2, 3> 

0   (Let Microsoft Windows decide which provider to use)
1   (Selects System VSS provider)
2   (Selects Software VSS provider)
3   (Selects Hardware VSS provider)

Example to configure NBU to use the System Provider:
     w2koption -backup -snapshotprovidertype 1

 

See the link below for TECHNOTE:

http://www.symantec.com/business/support/index?page=content&id=TECH158127

rk1074
Level 6
Partner

Thanks Jamie for sharing the resolution :)